Bedienungsanleitung Harman Kardon AVR355 (Seite 36 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

36 MULTIROOM OPERATION

Multiroom Operation

To operate the multizone system using the

remote, slide the Zone Select Switch at the bot-

tom of the remote to the “2” position or, alter-

natively use the Zone 2 Remote Control (AVR

355 only). Press a Source Selector to select a

source input for the remote zone.

Adjusting the volume or mute controls will only

affect the volume in the remote zone. The on-

screen menu functions will not be operative. The

remote will operate source devices that have

been programmed into it as explained in the

Initial Setup section.

If the Remote IR Output jack

on the AVR

is connected to an IR Input jack on compatible

Harman Kardon audio components such as CD,

DVD or cassette players, the transport functions

of those machines may also be controlled using

the Transport Controls

E on either

remote control.

NOTE: When the tuner is selected as the source

for Zone 2, any change to the frequency or pre-

set will also change the station being listened to

in the main room, if the tuner is in use there.

Similarly, if someone in the main room changes

the station, the change will also impact the

remote room.

When Zone 2 is turned on, the input selected

using the Zone 2 Menu will be fed to the Zone 2

Output jacks

on the rear panel as well as the

A-BUS Jack

, (AVR 355 only).

The volume will be as set in the same menu,

although it may also be adjusted using an

optional IR sensor and the Zone II remote in the

remote location or on the optional audio power

amplifier connected to the Zone 2 Output jacks

Although changes to the input source or Zone 2

volume will normally be made using an IR sensor

in the remote room that is connected to the

AVR, it is also possible to change those settings

from the main listening room.This is useful for

situations where some or all of the remote

rooms do not have an IR sensor, or to take

ontrol over the remote room without actually

being in that room.

Once Zone 2 is turned on, it will remain on even

if the AVR is placed in the Standby mode in the

ain room by pressing the Power Off Button

or the System Power Control

on the

front panel. To turn off the multiroom system

from the main listening room, when the AVR is

on, slide the Zone Select Switch

on the

Remote Control to Zone 2 (or, alternatively, use

the Zone 2 Remote Control that comes with the

AVR 355 only), and press the Off Button

Even when the AVR is turned off (to Standby

mode) and the multiroom system is turned off

too, the multiroom system may be turned on at

any time by pressing the ON Button

while

the Zone Select Button is set to Zone 2.

NOTE: Only analog audio sources are available

to the multizone system. To hear digital devices,

such as a CD player, in the remote zone, follow

these steps:

1. In addition to a digital audio connection,

connect the source device’s analog audio

outputs to any available analog audio inputs

on the AVR, noting in Table AA in the

appendix which set of inputs was used.

2. In the Setup Source menu, leave the Audio

Source setting at the digital audio input.

However, scroll down to the Zone 2 Audio

setting and select the analog audio source

used in step 1.

Multiroom Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR355 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info