Bedienungsanleitung Harman Kardon AVR355 (Seite 39 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Resolution to Display: Select the highest

resolution that your TV can show. If you use

HDMI, resolution selection happens

automatically. If you use analog signals, you

must choose the proper resolution. Note: if you

choose a resolution that is higher than your

screen can show, the picture disappears. In this

ase, wait for approx. 10 seconds, as the AVR

returns to the previous resolution if the new one

is not confirmed within this time. Default

resolution is 576i, which is the maximum that

can be transmitted by the simplest video

connection, Composite/CVBS.

Menu Appearance

OSD Transparency: This setting allows you to

select whether video programs will be visible

when the menu system is in use. Select Normal

for a fully-transparent background, Medium for

the menu background to be partially visible or

Opaque to block the view of any video programs

while the menus are on screen.

Volume Status Messages: When the AVR is

turned on, the volume is adjusted or the source

is changed, or if a change in the input signal is

detected, a status message will be displayed on

screen. Use this setting to select how long the

message remains visible. The setting varies from

2 to 10 seconds, with a default of 3 seconds.

Menus: Some menu settings only remain in

effect during the current listening session,

including the settings in the Surround Modes,

Video Modes and Audio Effects menus. This

setting governs how long these menus will

remain visible after your last adjustment, varying

from 5 seconds to 5 minutes, or no time-out (the

menu does not disappear until you close it), with

a default of 5 seconds.

Setup and Slide-In Menus: This setting

determines how long the setup menus (Main

Menu, Speaker Setup Menu, Zone 2 Menu, all

slide-in menus) remain visible after your last

adjustment. Select a timeout period of 5, 10 or

15 (the default) minutes, or no timeout, which

leaves the menus on screen until you manually

clear them. We recommend setting some timeout

period to avoid the possibility of burn-in damage

to plasma or CRT displays.

Screen Saver: Use this setting to program a

timeout period for no activity (with no menus

displayed) before the AVR’s built-in screen saver

begins. Select a period of 5 (the default), 10 or

20 minutes, or turn off the screen saver. We

recommend setting some timeout period to

avoid the possibility of burn-in damage to

plasma or CRT displays.

efault Surround Mode

n normal operation, when the AVR senses a

Dolby Digital or DTS digital audio data stream, it

will automatically switch the appropriate default

surround mode, with the AVR responding to the

data flags that are encoded on the DVD disc or

in the digital video broadcast. In most cases, this

is the correct mode, but you may have a

particular preference for the mode you wish to

hear when Dolby Digital or DTS is present. The

VR allows you to set the unit so that it will

either respond to the default or switch to your

desired mode.

If you wish to leave the default so that the mode

hoice encoded in the disc is always used, no

further action is needed. Simply leave the setting

at the factory default of ON.

To set the unit so that it responds to the last sur-

round mode used when a Dolby Digital or DTS

source is playing, press the

⁄

Buttons

so that the blue cursor bar is highlighting the

Default Surround Mode line. Press

the OK Button

, followed by the

‹

›

Buttons

so that OFF appears,

and the setting will change. Press the OK

Button

again to confirm the new setting.

The unit will now use the last mode, not the

disc’s default for the two digitally encoded data

streams.

This setting does not apply to standard PCM

digital inputs or to analog sources. In those

cases, the unit will always apply the surround or

processing mode that was last used for that

input.

If you wish to make other adjustments, press the

⁄

Buttons

until the blue cursor bar is

highlighting the desired setting. If you have no

other adjustments to make, press the OSD

Button

to exit the menu system.

Advanced Features

ENGLISH

ADVANCED FEATURES 39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR355 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info