Bedienungsanleitung Harman Kardon AVR355 (Seite 40 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Tuner Operation

o select the built-in tuner:

. Press the Source List Button on the front

panel and use the K/L Buttons to scroll

through the source list. The last-used band (AM

or FM) will be active.

. Press the Radio Source Selector on the

remote. Press this button again to switch bands

(AM or FM). A screen similar to the one shown

in Figure 23 will appear, with the band indicated

in the middle of the screen.The "XM Radio" that

appears as an option in the Source Menu can be

disregarded, as it is used in the US version only.

The Menu system skips over this option.

Figure 23 – FM Radio

Use the K/L Buttons to tune a station. The

frequencies will be displayed in the front panel

and graphically on screen.

The AVR defaults to automatic tuning, meaning

each press of the K/L Buttons scans through

all frequencies until a station with acceptable

signal strength is found. To switch to manual

tuning, in which each press of the K/L

Buttons steps through a single frequency

increment (0.05MHz for FM, or 9kHz for AM),

press the Menu Button. The Mode line will be

highlighted, and each press of the OK Button

toggles between automatic and manual tuning

modes as well as Stereo (in Automatic Mode)

and Mono (in Manual Mode).

You may also enter the frequency of a radio

station directly. In the Slide-In Menu opened by

pressing the Menu Button M with the unit in

FM-Mode, select Direct Entry (appearing just

above the preset channel listing) with the Arrow

Buttons, then press OK. The Main Information

Display now shows DIRECT IN as a slide-in

nformation, and a * moves back and forth to

indicate that the AVR is ready for Direct Entry of

the frequency. You must begin entering numbers

within 10 seconds. Otherwise, the AVR reverts to

previous mode. Now press the frequency digits.

If you begin with "1" to enter a station

frequency in the 100-range, the first "1" is

automatically registered as "10", after which

you may enter the third main digit and the two

decimal digits. Example: 96,50 is entered as it

appears: Nine, Six, Five, Zero. 102,65 is entered

like this: One, Two, Six, Five.

A total of 30 stations (AM and FM together)

may be stored as presets.When the desired

station has been tuned, press the OK Button,

and two dashes will flash in the front-panel

display. Use the Numeric Keys to enter the

desired preset number, and confirm with the OK

Button. If the preset number is higher than 9,

press the 0-Button on the Remote K first to

access two-digit numbers. If you do not press

this button first, you can only enter single-digit

numbers..

To tune a preset station, press the M/N Buttons

or press the Menu Button to view the list of

programmed presets and scroll to the desired

selection. Press the OK Button to tune the

station. You may also enter the preset number

using the Numeric Keys. For presets 10 through

30, press the Zero Button K first to show a

blinking 0 in the Information Display, then enter

the two digits. For example, enter preset 17 by

pressing 0, then 1, then 7. If you want to enter

another two-digit preset, you must press 0 again

first.

DS Operation

he AVR 255/AVR 355 is equipped with RDS

(Radio Data System), which brings a wide range

of information to FM radio. Now in use in many

countries, RDS is a system for transmitting sta-

tion call signs or network information, a descrip-

tion of station program type, text messages

about the station or specifics of a musical selec-

tion, and the correct time.

As more FM stations become equipped with RDS

capabilities, the AVR will serve as an easy-to-use

center for both information and entertainment.

This section will help you take maximum

advantage of the RDS system.

RDS Tuning

When an FM station is tuned in and it contains

RDS data, the AVR will automatically display the

station’s call sign or other program service in the

Main Information Display

and on the tv

screen if this is on.

RDS Display Options

The RDS system is capable of transmitting a

wide variety of information in addition to the

initial station call sign that appears when a

station is first tuned. In normal RDS operation

the display will indicate the station name,

broadcast network or call letters. Pressing the

Play Button

on the Remote enables you to

cycle through the various data types in the fol-

lowing sequence:

• The station’s call letters (

PS) (with some pri-

vate stations other information too).

• The station’s frequency (

FREQ MODE),

which is always shown on the TV On-Screen

Display, is shown in the Main Information

Display.

40 TUNER OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR355 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info