Bedienungsanleitung Harman Kardon AVR645 (Seite 12 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

12 MAIN REMOTE CONTROL FUNCTIONS

Navigation Button: This single disc-like

button is used to change or scroll through items

in the on-screen menus or on the front panel or

to make configuration settings such as digital

inputs or delay timing. When changing a setting,

first press the button for the function or setting

to be changed (e.g., press the Digital Select

Button

to change a digital input) and then

press one of these buttons to scroll through the

list of options or to increase or decrease a set-

ting. The sections in this manual describing the

individual features and functions contain specific

information on using these buttons for each

application.

Set Button: This button is used to enter

settings into the AVR’s memory. It is also used in

the setup procedures for delay time, speaker con-

figuration and channel output level adjustment.

Digital Select: Press this button to assign

one of the digital inputs

UV*Ó

to a source.

(See page 43 for more information on using

digital inputs.)

Numeric Keys: These buttons serve as a

ten-button numeric keypad to enter tuner preset

positions. They are also used to select channel

numbers when TV, VCR or Sat receiver has been

selected on the remote, or to select track

numbers on a CD, DVD or LD player, depending

on how the remote has been programmed.

Tuner Mode: Press this button when the

tuner is in use to select between automatic

tuning and manual tuning. When the button is

pressed so

MANUAL appears in the Main

Information Display

, pressing the Tuning

buttons

)

will move the frequency up or

down in single-step increments. When the FM

band is in use and

AUTO appears in the Main

Information Display

, pressing this button

will change to monaural reception making even

week stations audible. (See page 51 for more

information.)

Direct Button: Press this button when the

tuner is in use to start the sequence for direct

entry of a station’s frequency. After pressing the

button simply press the proper Numeric Keys

to select a station (See page 51 for more

information on the tuner).

Tuning Up/Down:When the tuner is in use,

these buttons will tune up or down through the

selected frequency band. If the Tuner Mode but-

ton

has been pressed or the Band button

on the front panel was held pressed so that

AUTO appears in the Main Information

Display

, pressing either of the buttons will

cause the tuner to seek the next station with

acceptable signal strength for quality reception.

When the

MANUAL appears in the Main

Information Display

, pressing these but-

tons will tune stations in single-step increments.

(See page 52 for more information.)

OSD Button: Press this button to activate

the On Screen Display (OSD) system used to set

up or adjust the AVR’s parameters.

Dolby Mode Selector: This button is used

to select one of the available Dolby Surround

processing modes. Each press of this button will

select one of the Dolby Pro Logic II modes, Dolby

3 Stereo or Dolby Digital. Note that the Dolby

Digital mode is only available with a digital input

selected and the other modes only as long as a

Dolby Digital source is not playing (except Pro

Logic II with Dolby Digital 2.0 recordings, see

Note on page 42). See page 28 for the available

Dolby surround mode options.

DTS Digital Mode Selector: When a DTS

source is in use the AVR will select the appropri-

ate mode automatically and no other mode will

be available. Pressing this button will display the

mode currently selected by the AVR´s decoder,

depending on the surround material played and

the speaker setting (see item

, page 5). When

a DTS source is not in use, this button has no

function. (See page 28, 33 for the available DTS

options.)

Logic 7 Selector: Press this button to

select one of the available Logic 7 surround

modes. (See page 38 for the available Logic 7

options.)

Transport Control Buttons: These buttons

do not have any functions for the AVR, but they

may be programmed for the forward/reverse play

operation of a wide variety of CD or DVD players,

and audio or video- cassette recorders. (See page

53 for more information on programming the

remote.)

Light Button: Press this button to activate

the remote’s built-in backlight for better legibility

of the buttons in a darkened room.

Skip Up/Down Buttons: These buttons do

not have a direct function with the AVR, but

when used with a compatibly programmed CD or

DVD player/changer they will change the tracks

on the disc currently being played.

Stereo Mode Selector: Press this button

to select a stereo playback mode. When the

button is pressed so that

DSP SURROFF

appears in the Main Information Display

the AVR will operate in a bypass mode with true

fully analog, two-channel left/right stereo mode

with no surround processing or bass manage-

ment as opposed to other modes where digital

processing is used. When the button is pressed

so that

SURROUND OFF appears in the

Main Information Display

, you may enjoy

a two-channel presentation of the sound along

with the benefits of bass management. When the

button is pressed so that

5 CHSTEREO or

7 CHSTEREO appears, the stereo signal is

routed to all five speakers, if installed. (See page

39 for more information on stereo playback

modes).

DTS Neo:6 Mode Selector: Pressing this

selector button cycles the AVR through the

various DTS Neo:6 modes, which extract a five-

or seven-channel surround field from two-chan-

nel program material (from PCM source or ana-

log input signal). The first press selects the last

DTS Neo:6 surround mode that was in use, and

each subsequent press selects the next mode in

the following order:

Macro Buttons: Press these buttons to

store or recall a “Macro”, which is a pre-pro-

grammed sequence of commands stored in the

remote. (See page 56 for more information on

storing and recalling macros.)

Disc Skip Button: This button has no

direct function for the AVR 645 but may be used

to change the disc in a CD or DVD changer when

the remote is programmed for that type of

device.

DTS Neo:6 MUSIC

DTS Neo:6

MOVIES

Main Remote Control Functions

29851_AVR645_ENG 30/10/06 9:46 Side 12

Harman Kardon AVR645 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info