Bedienungsanleitung Harman Kardon AVR645 (Seite 29 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

SYSTEM CONFIGURATION 29

ENGLISH

System Configuration

Figure 16

Night Mode Settings

The Night mode is a feature of Dolby Digital that

uses special processing to preserve the dynamic

range and full intelligibility of a movie sound track

while reducing the peak level. This prevents

abruptly loud transitions from disturbing others,

without reducing the sonic impact of a digital

source. Note that the Night mode is only available

when the Dolby Digital surround mode is selected.

To adjust the Night mode setting from the menu

press the OSD Button

E so that the

MASTER menu appears. Then press the

button

F to access the SURROUND

SETUP

and press the Set Button

Q to

select the

SURROUND SETUP menu. Press

Set

Q to select the DOLBY SURR

SETUP

menu (see fig. 15).

To adjust the Night mode setting, make certain

that the › cursor is on the NIGHT line of the

DOLBY menu. Next, press

‹

›

Buttons

F to choose between the following

settings.

OFF: When OFF is highlighted, the Night mode

will not function.

MID: When MID is in the highlighted video,

a mild compression will be applied.

MAX: When MAX is in the highlighted video,

a more severe compression algorithm will be

applied.

When you want to use the Night mode feature,

we recommend that you select the MID setting

as a starting point and change to the MAX

setting later, if desired.

Note that the Night mode may be adjusted

directly any time that Dolby Digital surround

mode is selected by pressing the Night button

. When the button is pressed, the words

D-RANGE followed by the current setting

(

MID, MAX, OFF) will appear in the lower

third of the video screen and in the Main

Information Display

. Press the

⁄

but-

tons

F within five seconds to select the

desired setting, then press the Set Button

Q to confirm the setting.

When all settings on the

DOLBY

SURROUND

menu have been competed, press

the

⁄

Navigation Button

F until

the cursor is next to

BACK TO SURROUND

SETUP

and press the Set Button

You may then make any additional changes to

the available options from that screen, or use

⁄

Navigation Button

F to move the

cursor to the

BACK TO SURROUND

CONFIG

menu and press the Set Button

Q again to back up one menu.

At the main

SURROUND SETUP menu, you

may change the

SOURCE to make adjustments

to another input, or when all input sources have

been configured, use

⁄

Navigation Button

F to move the cursor to the BACK TO

MASTER MENU

and press the Set Button

Q to return to the main menu so that you

may move to the next step in configuring your

AVR 645.

Using EzSet/EQ

The AVR uses Harman Kardon’s EzSet/EQ tech-

nology to automatically configure your system to

deliver the best possible performance based on

your specific speaker selection, where the speak-

ers are placed in the room and the acoustic influ-

ences in your listening room. By using a series of

test signals and the processing power of the

Texas Instruments DA 610 digital signal proces-

sor, EzSet/EQ eliminates the need for manual

adjustment of speaker “size”, crossover, delay

and output level settings while it adds the power

of a multi-band parametric equalizer to smooth

out the frequency settings for optimal sound

reproduction.

In addition to making system setup quick and

easy, EzSet/EQ is more precise than manual

settings. With EzSet/EQ you are able to calibrate

your system in a fraction of the time it would

take to enter the settings manually, and with

results that rival those achieved with expensive

test equipment and time consuming procedures.

The end result is a system calibration profile that

enables your new receiver to deliver the best

possible sound no matter what type of speakers

you have or what the dimensions of your

listening room are.

We recommend that you take advantage of the

precision of EzSet/EQ to calibrate your system,

but if desired you may also make any of the

configuration settings manually, or trim the

settings provided by EzSet/EQ by following the

instructions on pages 32-35.

Before starting the EzSet/EQ process, make cer-

tain that you have connected all speakers for

your system and that you have both the EzSet/EQ

microphone and the extender rod handy. If you

have a standard camera tripod, attach the exten-

der rod to the tripod, and then screw the micro-

phone to the top of the rod. Place the tripod at

your primary listening position, at least one

meter from the nearest speaker and adjust it so

that microphone is at least one meter above ear

level. If you do not have a tripod, simply screw

the extender rod into the bottom of the EzSet/EQ

microphone.

Next, plug the microphone into the EzSet/EQ

Microphone Jack

located behind the Front

Panel Control Door.The microphone cable is

approximately 6 meters long, which should

accommodate most listening room situations. If

required, you may use an optional extension

cable, available at most electronics stores, for use

in larger rooms. However, we recommend that

you make every effort to avoid using extension

cords for the microphone cable as they may

adversely affect the test results.

Finally, before going further, make certain that

the program volume is at -35dB. If there is a

volume or “level” control on your subwoofer,

make certain that it is set to at least the mid-

point, if not a bit higher

You are now ready to start the EzSet/EQ process

by following these steps:

Step 1. Navigate to the

EZSET/EQ MODE

menu (Fig. 17a) by first pressing the OSD

Button

on the remote. Press the

Navigation Button

until the ➔ cursor is

pointing to

EZSET/EQ in the MASTER

. Press the Set Button

to bring the

menu to the screen.

Figure 17a

* EZSET/EQ MAIN *

Select activity

AUTOMATIC EQ DESIGN

MANUAL EQ DESIGN

EZSET/EQ MANUAL SETUP

BACK TO MASTER MENU

→

** DOLBY SURROUND **

MODE: DOLBY DIGITAL

CENTER WIDTH: ---

DIMENSION : ---

PANORAMA : ---

NIGHT:OFF MID MAX

BACK TO SURR SELECT

→

29851_AVR645_ENG 30/10/06 9:46 Side 29

Harman Kardon AVR645 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info