Bedienungsanleitung Harman Kardon AVR645 (Seite 40 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

40 OPERATION

Operation

Basic Operation

Once you have completed the setup and configu-

ration of the AVR, it is simple to operate and

enjoy. The following instructions should be

followed for you to maximize your enjoyment of

your new receiver:

Turning the AVR On or Off

• When using the AVR for the first time, you must

press the Main Power Switch

on the front

panel to turn the unit on. This places the unit in a

Standby mode, as indicated by the amber color of

the Power Indicator

. Once the unit is in

Standby, you may begin a listening session by

pressing the System Power Control

or the

Source button

on the front panel or the

AVR Selector

B. Note that the Power

Indicator

will turn blue. This will turn the unit

on and return it to the input source that was last

used. The unit may also be turned on from Standby

by pressing any of the Source Selector buttons

on the remote

4567

BCD or

the Source button

on the front panel.

To turn the unit off at the end of a listening

session, simply press the System Power

Control

on the front panel or the Power

Off Button

A on the remote. Power will

be shut off to any equipment plugged into the

rear panel Switched AC Outlets

and the

Power Indicator

will turn orange.

When the remote is used to turn the unit “off” it

is actually placing the system in a Standby mode,

as indicated by the orange color of the Power

Indicator

When you will be away from home for an

extended period of time it is always a good idea

to completely turn the unit off with the front

panel Main Power Switch

NOTE: All preset memories may be lost if the

unit is left turned off with the Main Power

Switch

for more than two weeks.

Using the Sleep Timer

• To program the AVR for automatic turn-off, press

the Sleep Button

on the remote. Each press

of the button will increase the time before shut

down in the following sequence:

The sleep time will be displayed in the Lower

Display Line

and it will count down until

the time has elapsed.

When the programmed sleep time has elapsed,

the unit will automatically turn off (to Standby

mode). Note that the front panel display will dim

to one half brightness when the Sleep function is

programmed. To cancel the Sleep function, press

and hold the Sleep Button

until the infor-

mation display returns to normal brightness and

the Sleep indicator numbers disappear and the

words

SLEEP OFF appear in the Main

Information Display

Source Selection

• To select a source, press any of the Source

Selector buttons on the remote

467

CD.

NOTE: After pressing one of the Input Selector

buttons

D to turn the unit on, press the

AVR Selector

B to have the remote

control the AVR functions.

• The input source may also be changed by

pressing the front-panel Input Source Selector

button

. Each press of the button will move

the input selection through the list of available

inputs.

• As the input is changed, the AVR will automati-

cally switch to the digital input (if selected),

surround mode component video input, A/V Sync

Delay and Night Mode configurations that were

in effect the last time that input was used.

• The front-panel Video 4 Inputs

, Optical

Digital 4 Input

or the Coaxial Digital 4

Input

may be used to connect a device such

as a video game or camcorder to your home

entertainment system on a temporary basis.

When they are configured as outputs (see page

25) you can also connect an audio or video

recorder (composite or S-Video) for recording the

source selected.

• As the input source is changed, the new input

name will appear momentarily as an on-screen

display in the lower third of the video display. The

input name will also appear in the Main

Information Display

• When a pure audio input (CD, Tuner, Tape,

6/8 Channel Input) is selected, the last video

input used remains routed to the Video Out-

puts

(except from its own Video 1/ source)

and Video Monitor Output

. This permits

simultaneous viewing and listening to different

sources.

• When a Video source is selected, its audio

signal will be fed to the speakers and the video

signal for that input will be routed to the

appropriate Monitor Output Jack

and will be

viewable on a TV monitor connected to the AVR.

If a component video source is connected to the

DVD

or Video 1 or 2

Component

Inputs, it will be routed to the Component

Video Outputs

. Make certain that your TV is

set to the proper input to view the appropriate

video signal (composite, S-Video or component

video.

6-Channel/8-Channel Direct Input

• There are four input choices available for use

with sources such as a DVD-Audio or SACD

player that are connected to the 8-Channel

Direct Inputs

. Select the appropriate input

according to the way your system and source

equipment is configured:

• The 6 CH DIRECT input should be used when

the SBR and SBL inputs are NOT in use and the

input source device has its own internal bass

management system. This input passes the input

from the source directly through to the volume

control without any analog to digital conversion

and it mutes the unused input jacks to prevent

unwanted noise from interfering with system

performance.

• The 6 CH DVD AUDIO input should be used

when the SBR and SBL inputs are NOT in use and

the input source device does NOT have its own

internal bass management system. When this

input is in use the analog source is converted to

digital so that you may use the same Quadruple

Crossover bass management options for the

direct input as you do with all other inputs.

This input also mutes the unused input jacks to

prevent unwanted noise from interfering with

system performance.

• The 8 CH DIRECT INPUT should be used when

an input is connected to all eight 8-Channel

Direct Inputs

and when the input source

device has its own internal bass management

system. This input passes the input from the

source directly through to the volume control

without any analog to digital conversion.

• The 8 CH DVD AUDIO input should be used

when an input is connected to all eight

8-Channel Direct Inputs

and the input

source device does NOT have its own internal

bass management system. When this input is in

use the analog source is converted to digital so

that you may use the same Quadruple Crossover

bass management options for the direct input as

you do with all other inputs.

min

OFF

29851_AVR645_ENG 30/10/06 9:46 Side 40

Harman Kardon AVR645 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info