Bedienungsanleitung Harman Kardon AVR645 (Seite 57 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

PROGRAMMING THE REMOTE 57

ENGLISH

Programming the Remote

Figure 47

3. At the next menu screen (Figure 48) press the

Set Button

to begin recording a macro.

Figure 48

4. The next display screen (Figure 49) is where

you select the button that will be used to

recall the macro. The choices are the Power

On Button

or one of the discrete Macro

Buttons

. Press the

⁄¤

Navigation

Buttons

until the name of the button

you wish to program the macro into is shown.

For this example we will show how to program

a series of commands that will automatically

be sent out every time the Power button is

pressed.

Figure 49

5. The next screen that appears (Figure 50) is

where you select the device for the first

command that will be sent out as part of the

macro. Press the

⁄¤

Navigation Buttons

until the name of the device appears on

the left side of the lower line in the LCD

display. For this example, the first button we

want to have the macro “press” is the Power

On button, so the AVR device is selected. Press

the Set Button

when the desired device

name appears to move to the next

programming step.

Figure 50

6. The next display (Figure 51) is where you

begin entering the individual commands for

the macro, in the order you wish them to be

transmitted. Remember that when you want to

change devices, you must first press the Input

Selector

for that button, and then

press the Command or Function key. Since we

want to program a series of events that occur

each time the Power On button is pressed,

press the AVR button. In your specific macro,

this is the first command button.

Figure 51

7. The next display (Figure 52) and the

subsequent screens are where the actual

macro programming take place. The words at

the left side of the top line of the display show

the button that is being programmed (e.g., the

Power On Button

or one of the Macro

Buttons

) and the indication at the right

side of the top line shows the number of

macro steps available of 20 possible steps.

Following the instructions on the remote’s LCD

screen, press the first key you wish to be

transmitted in the macro. In our example, we

first want the AVR to turn on, so the Power

Button

should be pressed.

Figure 52

8. Once the first command button for the macro

has been pressed, continue to press the

buttons you wish to be part of the macro, in

the order they will be used. Press each button

within five seconds of the last button,

remembering to press the Input Selector

when you are changing device

functions. As the buttons on the remote are

pressed, the remote’s display screen will show

the steps in the macro as they are

programmed (Figure 53).

Figure 53

9. For our example, we first want the AVR Power

On button pressed, followed by the TV Power

On, followed by the Cable Box On, followed by

the selection of the Logic 7 mode. To do that,

press the buttons in this order:

• Power On

• VID 2/TV

• Power On

• VID 3/Cable

• Power On

• AVR

• Logic 7

As each button is pressed to enter it into the

macro you will see the button names appear

and then scroll up on the LCD display as your

confirmation of the key entry (Figure 53).

10. When all commands for the macro have been

entered, press the Set Button

to save

the macro. The display screen will show the

button to which the macro has been

programmed and the number of steps used,

and the word SAVED will blink four times in

the lower line of the LCD display. When the

display returns to normal, the macro has been

entered and the remote is ready for operation.

11. If a macro has been programmed into the

Power On Button

, it will play back

anytime the Power On button is pressed. As

the macro plays, you will see the steps

appear in the remote’s LCD display. Macros

programmed into one of the four discrete

Macro buttons may be activated at any time

by pressing the appropriate button.

Erasing a Macro

Once a macro has been created and stored in the

AVR remote’s memory, you have the option of

erasing it. You may do this at any time by

following these steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the

button when the red light under the Set

Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄

Navigation Buttons

three times so that MACRO appears on the

bottom line of the LCD screen, as shown in

Figure 47. Press the Set Button

to enter

the main macro menu branch.

3. At the next menu screen (Figure 54) press

⁄¤

Navigation Buttons

until the

bottom line in the remote’s LCD display reads

ERASE A MACRO, as shown in Figure 54.

Press the Set Button

to begin the

process of erasing a macro.

Figure 54

4. The next display screen (Figure 55) is where

you select which macro will be erased. Press

the

⁄¤

Navigation Buttons

until the

number of the macro you wish to erase

appears. For this example we will erase the

Power On macro created in the previous

section. When the name of the macro to be

erased appears, press the Set Button

Figure 55

5. The word ERASED will flash four times in the

bottom line of the remote’s LCD display, and

then the display will return to its normal

condition. When that happens the macro is

erased and the remote is returned to normal

operation.

ERASE A MACRO

POWER ON

MACRO

ERASE A MACRO

[AVR]

[AVR] POWER ON

POWER ON 00/20

SELECT KEY PRESS

SELECT A DEVICE

AVR

SELECT A DEVICE

AVR

RECORD A MACRO

POWER ON

MACRO

RECORD A MACRO

MAIN MENU

MACRO

29851_AVR645_ENG 30/10/06 9:46 Side 57

Harman Kardon AVR645 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info