Bedienungsanleitung Harman Kardon AVR645 (Seite 58 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

58 PROGRAMMING THE REMOTE

Programming the Remote

Read a Macro

To check the commands stored in the remote’s

memory for one of the buttons, follow these

steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the

button when the red light under the Set

Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄

Navigation Buttons

three times so that MACRO appears on the

bottom line of the LCD screen, as shown in

Figure 47. Press the Set Button

to enter

the main macro menu branch.

3. At the next menu screen (Figure 56) press the

⁄¤

Navigation Buttons

until the

bottom line in the remote’s LCD display shows

READ A MACRO, as shown in Figure 56.

Press the Set Button

to begin the

process of erasing a macro.

Figure 56

4. The next display screen (Figure 57) is where

you select the macro to be read. Press the

⁄¤

Navigation Buttons

until the

name of the macro you wish to read appears.

For this example, we will read back the Power

On macro created in the previous section.

When the name of the macro to be erased

appears, press the Set Button

Figure 57

5. As soon as the Set button is pressed, the first

two steps in the macro will be appear in the

remote’s LCD screen. You may then use the

⁄¤

Navigation Buttons

to step up or

down through the list of commands stored as

the macro. As you read the display, you will

see Device Selector Buttons

appear in brackets, (e.g., [AVR]). When the

step in the macro is a function, navigation or

any other button, it will appear next to the

bracketed read-out of the underlying device

(e.g., [AVR] POWER ON).

6. When you are finished reviewing the macro’s

contents, press the Set Button

to return

the remote to normal operation.

Punch-Through Configuration

Punch-through is a capability of the remote that

allows the Volume controls, Channel Up/Down

buttons or Transport keys (Play, Stop, Record, Fast

Forward and Reverse, and Skip Up/Down) to link

to a different device. For example, if your TV, cable

box or satellite receiver is connected through the

AVR you will most likely want to use the AVR’s

volume control commands even when the remote

has been set to issue all other commands for the

video device. “Punch-through” enables you to

easily program the remote to do this.

Volume Punch-Through

Follow these steps to enable the Volume

Up/Down and Mute controls from one device to

be used when the remote is otherwise

programmed for a different device.

Note for Volume Punch-Through:

The remote’s default settings are for the AVR’s

volume controls to be used when any input or

device is selected with the exception of the VID

2/TV button. There is no need to program the

remote for volume punch-through for the AVR’s

controls with other sources, such as DVD. To have

the AVR’s volume commands used when the TV

device is selected, follow these steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the button

when the red light under the Set Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄¤

Navigation Buttons

until PUNCH-THROUGH appears on the

bottom line of the LCD screen, as shown in

Figure 58. Press the Set Button

to enter

the main punch-through menu branch.

Figure 58

3. At the next menu screen (Figure 59) press the

Set Button

to begin programming the

remote for Volume punch-through.

Figure 59

4. The next display screen (Figure 60) is where

you select the device that will receive the

punch-through commands. In our example,

that is the VID 2/TV button, as that is where

we want the AVR’s volume controls to be

active. Press the

⁄¤

Navigation Buttons

until the name of the base device appears

and then press the Set Button

Figure 60

5. At the next display screen (Figure 61), you will

select the device whose Volume Up/Down and

Mute commands will be used. Press the

⁄¤

Navigation Buttons

until the desired

device’s name appears to the right of the

device in use. In our example, that is the AVR

(indicated by AVR). When the desired

combination of devices appears, press the Set

Button

Figure 61

6. When the Set button is pressed, the display will

change to show you that the new combination

of control commands is being saved to the

unit’s memory, as shown in Figure 62.The word

SAVED will flash four times and then the

remote will return to normal operation.

Figure 62

7. Once the punch-through is programmed, the

Volume Up/Down and Mute buttons of the

second device named will be used when those

buttons

are pressed while the master

device is in use.

Returning the Volume Control Settings to

Default Operation:

If you wish to remove the Volume punch-through

so that the commands for Volume and Mute are

returned to the factory default setting, follow the

steps shown above, except that in Steps 4 and 5,

select the same device for both the DEVICE IN

USE on the left side of the bottom line and the

PUNCH-THROUGH device. In the example used,

the display to return the remote to default

settings will appear as shown in Figure 63.

Figure 63

Channel Punch-Through

Channel punch-through allows the Channel

Up/Down buttons to send commands to a

different device than the one that has been

selected for other commands. For example, you

may wish to use a cable box or satellite receiver

as the source for a VCR, so you would want the

Channel Up/Down Selectors

to transmit

commands to the cable box even though the

other button commands are programmed to

operate the VCR.

PUNCH-THROUGH

TV< -TV

TV< -AVR [VOL]

SAVED

PUNCH-THROUGH

TV< -AVR

DEVICE IN USE

PUNCH-THROUGH

VOLUME

MAIN MENU

PUNCH-THROUGH

READ A MACRO

POWER ON

MACRO

READ A MACRO

29851_AVR645_ENG 30/10/06 9:46 Side 58

Harman Kardon AVR645 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info