Bedienungsanleitung Harman Kardon AVR645 (Seite 60 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

60 PROGRAMMING THE REMOTE

Programming the Remote

Returning the Transport Control Settings to

Default Operation:

If you wish to remove the Transport Punch-

Through so that the transport commands are

returned to the factory default setting, follow the

steps shown above, except that in Steps 4 and 5,

select the same device for both the DEVICE IN

USE on the left side of the bottom line and the

PUNCH-THROUGH device. In the example used,

the display to return the remote to default

settings will appear as shown in Figure 73.

Figure 73

Renaming

While the names given to the buttons and inputs

on the AVR represent recognizable categories of

audio/ video products, system operation may be

easier if the displays shown in the remote’s LCD

screen are customized to reflect the specific

characteristics of a playback source’s brand name

or the new function given to a specific button

when one remote’s controls are programmed into

the AVR remote. The AVR remote allows you to

change the name of either a master device or

any button on the remote using the following

steps.

Renaming a Device

To rename a specific device/input source button,

follow these steps. For this example, we will

show you how to rename the Device/Input

Selector normally shown as “TV” to “HDTV

TUNER.”

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the

button when the red light under the Set

Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄¤

Navigation Buttons

until RENAME appears on the bottom

line of the LCD screen, as shown in Figure 74.

Figure 74

3. At the next menu screen press the

⁄¤

Navigation Buttons

until RENAME

DEVICE appears on the bottom line of the

LCD screen, as shown in Figure 75. Press the

Set Button

to begin renaming a device.

Figure 75

4. The next display screen (Figure 76) is where

you select the device that will be renamed. In

our example, that is the TV button. Press the

⁄¤

Navigation Buttons

until the

name of the base device appears and then

press the Set Button

Figure 76

5. At the next menu screen you will see the

device name on the bottom line of the display

with a blinking cursor box to the right of the

device name. Press the

‹

Navigation

Buttons

to return the blinking cursor to

the far left side of the display line. You may

then retitle the device name as shown in the

next step.

6. To enter the new name, press the Numeric

Keys

. The letters above the numbered

buttons indicate which letter or symbol will

appear when the button is pressed during the

renaming process. The first press of the button

will enter the first letter shown, subsequent

presses of the same button will change the

display to the other letters above that

numbered key. For example, since the first

letter we need to rename the input to HDTV

Tuner is an “H”, you would locate the “H”

above the “4” button, and press the button

twice. The first press shows a “G,” the second

press changes it to an “H.” Consult the table

at the end of this section to see which

characters pressing a particular button

generates.

7. After you enter the first letter of the new

device name, there are three options for

entering the next character:

a. To enter a letter that requires a different

numeric key to be pressed, simply press

that button. The cursor will automatically

move to the next position and the first

letter accessed by the new button will

appear. Following our example, the next

letter needed is a “D,” so you would press

the “3” button once.

b. To enter a letter that uses the same

numeric key, you must first press the

›

Navigation Buttons

to move the

blinking cursor block to the next position.

Then press the Numeric Key

required to enter the desired letter.

c. To enter a blank space, press the

›

Navigation Buttons

twice. The first

press will move the cursor to the right, and

the second press will move the cursor one

more space to the right, leaving a blank

space between the last letter and the next

one.

8. Repeat Step 7 as needed to enter all the

needed letters, numbers, characters and

spaces.

9. When the text entry is complete, press the

Set Button

. The LCD display will blink

DEVICE RENAMED three times and then

return to normal operation.

Once a device is renamed you will see the new

name on the top line of the remote’s LCD display

whenever the Input/Device Selector

pressed, or when any other command/function

button on the remote is pressed after the main

Device Selector is pressed. Note that renaming a

device in the remote will not change the name of

the input used by the on-screen menu system of

the AVR.

Notes on Renaming Devices:

• To move the cursor to the right or left of the

display during the renaming process, press the

‹

›

Navigation Buttons

as required.

• The table below shows the letters, numbers

and characters that may be accessed by

pressing the Numeric Keys:

Key Characters Key Characters

1 [,],/,1 6 M,N,O,6

2 A,B,C,2 7 P,Q,R,S,7

3 D,E,F,3 8 T,U,V,8

4 G,H,I,4 9 W,X,Y,Z,9

5 J,K,L,5 0 -,.,#,0

• Renaming a device changes the name of the

device only, not any of the individual key

functions within that device memory. To

change the name of an individual device,

follow the instructions in the next section.

Renaming Individual Keys

Thanks to the programming flexibility of the AVR

remote, an individual button on the remote may

be assigned a feature or function that is different

from the name that appears as the factory

default when the button is pressed. However,

with the Rename Key function it is possible to

rename almost any button on the remote so that

when the button is pressed you will see a more

descriptive or appropriate name displayed.

To rename a specific button on the remote,

follow these steps. For this example, we will

show you how to rename the Tone Control

Button

, which is normally not used when

DVD is selected so that it reads ZOOM in the

remote’s display.

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the

button when the red light under the Set

Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄¤

Navigation Buttons

until RENAME appears on the bottom

line of the LCD screen, as shown in Figure 74.

RENAME DEVICE

RENAME

RENAME DEVICE

MAIN MENU

RENAME

PUNCH-THROUGH

TV< -TV

29851_AVR645_ENG 30/10/06 9:46 Side 60

Harman Kardon AVR645 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info