Bedienungsanleitung Harman Kardon AVR645 (Seite 61 von 68) (Englisch)

502558

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

PROGRAMMING THE REMOTE 61

ENGLISH

Programming the Remote

3. At the next menu screen press the

⁄¤

Navigation Buttons

until RENAME

KEY appears on the bottom line of the LCD

screen, as shown in Figure 77. Press the Set

Button

to continue.

Figure 77

4. The next display screen (Figure 78) is where

you select the device within which the key to

be renamed exists. Press the

⁄¤

Navigation Buttons

until the name of

the base device appears. In our example, since

we want to rename a button within the DVD

device memory, DVD should appear in the

lower line of the LCD. When the desired device

name appears, press the Set Button

Figure 78

5. At the next menu screen you will select the

first button within the device to be renamed,

as instructed in the display shown in Figure

79. Select the button by simply pressing it on

the remote.

Figure 79

6. Depending on whether or not the button

pressed already has a named function within

the device selected, one of two things will

happen.

a. If the button to be renamed already has a

pre-programmed, or previously renamed

title in the remote’s memory, you will see

that name on the top line of the LCD

display, and a blinking block cursor will

appear on the far left side of the bottom

line of the display, as shown in Figure 80.

b. If the button to be renamed does not have

a function in the device selected, the top

line of the LCD screen will be blank, and a

blinking block cursor will appear on the far

left side of the bottom line of the display,

as shown in Figure 81.

Figure 80

Figure 81

7. To enter the new name for the key, press the

Numeric Keys

. The letters above the

numbered buttons indicate which letters or

symbols will appear when the button is

pressed during the renaming process. The first

press of the button will enter the first

character shown, subsequent presses of the

same button will change the display to the

other letters above that numbered key. For

example, since the first letter we need to

rename the Tone button to Zoom is a “Z,” so

you would locate the “Z” above the “9”

button, and press the button four times. The

first press shows a “W,” the subsequent

presses step through the other letters available

until the “Z” appears. Consult the table on the

previous page to see which characters are

available by pressing a particular button.

8. After you enter the first letter of the new

device name, there are three options for

entering the next character:

a. To enter a letter that requires a different

numeric key to be pressed, simply press

that button. The cursor will automatically

move to the next position and the first

letter accessed by the new button will

appear. Following our example, the next

letter needed is an “O,” so you would press

the “6” button once.

b. To enter a letter that uses the same

numeric key, you must first press the

›

Navigation Buttons

to move the

blinking cursor block to the next position.

Then press the Numeric Key

required to enter the desired letter. This is

the way you would enter the second “O” in

the word ZOOM, and again for the letter

“M.”

c. To enter a blank space, press the

›

Navigation Buttons

twice. The first

press will move the cursor to the right, and

the second press will move the cursor one

more space to the right, leaving a blank

space between the last letter and the next

one.

9. Repeat Steps 7 and 8 as needed to complete

entering the needed letters, numbers,

characters and spaces.

10. When the text entry is complete, press the

Set Button

. The new name will be

entered into the remote’s memory, replacing

the default name.

11. At this point you have two options:

a. If you wish to program an additional key

within the same device, press the Set

Button

as instructed by the bottom

line of the LCD display reading ANOTHER

KEY. The remote will return to the

SELECT A KEY menu option as shown in

Step 6. Repeat the instructions in Steps 6

though 11 to rename the next key.

b. If you have no additional keys to rename,

press the

⁄

Navigation Buttons

once so that the menu screen displays

EXIT on the bottom line of the display.

Press the Set Button

to return the

remote to normal operation.

Notes on Renaming Keys:

• Renaming a key does not change its function.

You may change the function of an individual

key by learning a new code into the remote.

See page 54 for more information.

• When a key is renamed it will only apply to the

specific device selected in Step 4. The same key

may be renamed as needed for each individual

device with which it is used.

Resetting the Remote

Depending on the way in which the remote has

been programmed, there may be a situation

where you wish to totally erase all changes that

have been made to the remote and return it to

the factory defaults. You may do that by

following the steps shown below, but remember

that once the remote is reset, ALL changes that

have been made, including programming for use

with other devices, learned keys, macros, punch-

through settings and key names, will be erased

and any settings you had previously made will

have to be reentered.

To erase all settings and reset the remote to the

original factory default settings and displays,

follow these steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 25 appears in the remote’s LCD

Information Display

. Release the

button when the red light under the Set

Button

appears.

2. The remote’s MAIN MENU message (Figure

26), will appear in the LCD display and the

Set Button

will remain illuminated in

red. Press the

⁄¤

Navigation Buttons

until USER RESET appears on the

bottom line of the LCD screen, as shown in

Figure 82.

Figure 82

MAIN MENU

USER RESET

DISC SKIP

SELECT A KEY

SELECT A DEVICE

DVD

RENAME

RENAME KEY

29851_AVR645_ENG 30/10/06 9:46 Side 61

Harman Kardon AVR645 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info