Bedienungsanleitung Harman Kardon BDS 375 -SET (Seite 20 von 38) (Englisch)

537901

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

BDS Using the Receiver

Using the Receiver

NOTE: Before using your new BDS receiver, be sure to set the speaker distances, as

explained in Audio Settings: Speaker Settings, on page 18.

Home Menu

Press the Home button to display the Home Menu screen:

Home Menu

DLNA

Bluetooth

YouTube

Pandora

Picasa

FM Radio

Type: DLNA

01 / 10

The available sources are listed on the left.

If a disc has been inserted into the receiver’s built-in disc slot, it will appear on the list as

either “CDDA” (CD), “DVD Video” (DVD) or “Blu-ray Disc.” If you have connected an iOS

device to the receiver’s USB port it will appear on the list as “iPod.” If you have inserted a

USB device into the receiver’s USB port, it will appear on the list as “USB.”

NOTE: Digital and analog audio sources connected to the receiver’s rear-panel digital and

line inputs will not appear on the list but can be selected using the remote’s “Aux” Input

button (see Listening to Audio Sources, on page 25).

To select a source from the list, use the Cursor Up/Down buttons to highlight the desired

source, then press the OK button to select it. You can also select a source directly by

pressing its Input button on the remote.

Input

Buttons

To use the Playlist function, see Using Playlists, on page 27.

Adjusting Individual Speaker Volumes

You can adjust the volumes of the system’s individual speakers while you’re listening

to music.

1. Press the Home button and use the Cursor and OK buttons to select Settings. The

Settings menu will appear.

2. Select the Audio Settings option. The Audio Settings menu will appear.

3. Select Speaker Settings, then select Manual Conﬁguration, and then select your

system’s speaker conﬁguration. After you select your system’s conﬁguration, the

speaker setup screen will appear.

Tone Controls

Audio Output

Speaker Settings

Left (0.0 dB, 0.0m/0ft)

Right (0.0 dB, 0.0m/0ft)

SUB

LS RS

Audio Settings

4. The front left and front right speakers will be highlighted. To adjust either of them,

press the OK button. To adjust a different speaker, use the cursor buttons to highlight

it, and press the OK button. The Level and Distance selection screen will appear.

Tone Controls

Audio Output

Speaker Settings

Left (0.0 dB, 0.0m/0ft)

Right (0.0 dB, 0.0m/0ft)

SUB

LS RS

Level

Distance

Audio Settings

5. Make sure that Level is highlighted, and press the OK button. The Volume adjustment

bars will appear.

Tone Controls

Audio Output

Speaker Settings

Left (0.0 dB, 0.0m/0ft)

Right (0.0 dB, 0.0m/0ft)

SUB

LS RS

Audio Settings

Left

Right

6. Select the speaker you want to adjust, and use the left and right arrow buttons to

adjust its volume. You can vary the volume from +10dB to –10dB, in 1dB increments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 375 -SET Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 375 -SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info