Bedienungsanleitung Harman Kardon BDS 375 -SET (Seite 21 von 38) (Englisch)

537901

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

BDS Using the Receiver

7. Press the Back button twice to return to the speaker setup screen (the front left

and front right speakers will still be highlighted). To adjust the volume of a different

speaker, use the cursor buttons to highlight it and press the OK button. Repeat Steps

5 – 6 for that speaker.

8. When you are ﬁnished adjusting the volumes of all of your system’s speakers, press

the Back button repeatedly to return to the Home Menu screen.

Notes on Setting Speaker Volumes in 5.1-Channel Systems:

While setting your system’s individual speaker volume levels is ultimately up to your

personal taste, here are some ideas you may ﬁnd helpful:

• For ﬁlms and video-music programs, your overall goal should be to create an

enveloping, realistic sound ﬁeld that draws you into the ﬁlm or music program

without drawing your attention away from the action on the screen.

• For multichannel music recordings, some music producers will create a sound ﬁeld

that places the musicians all around you; others will create a sound ﬁeld that places

the musicians in front of you, with more subtle ambience in the surround speakers

(as you would experience in a concert hall).

• In most 5.1-channel ﬁlms, the surround channels are not intended to be as loud or

as active as the front channels. Adjusting the surround speakers so they are always

as loud as the front channels could make dialogue difﬁcult to understand and will

make some sound effects sound unrealistically loud.

Notes on Setting Subwoofer Volume:

• Sometimes the ideal subwoofer volume setting for music is too loud for ﬁlms, while

the ideal setting for ﬁlms is too quiet for music. When setting the subwoofer volume,

listen to both music and ﬁlms with strong bass content and ﬁnd a “middle ground”

volume level that works for both.

• If your subwoofer always seems too loud or too quiet, you may want to place it in

a different location. Placing the subwoofer in a corner will always tend to increase

its bass output, while placing it away from any walls or corners will always tend to

lessen its bass output.

IMPORTANT: Do not turn the receiver’s volume up to or past the point where the

audio from the speakers becomes distorted. Doing so can damage the speakers.

Surround-Sound Modes

Your BDS receiver can decode and play audio programs in these native audio formats:

• Dolby Digital

• Dolby Digital Plus

• Dolby TrueHD

• DTS Digital

• PCM

• MP3: 32kbps – 320kbps bitrates, including variable bitrate encoding

The audio formats available for any particular program depend on the program and on

how you have conﬁgured your BDS receiver in the Audio Settings menu:

Available Audio Formats

2.0- and 2.1-

Channel Setup

Conﬁguration

3.1-Channel Setup

Conﬁguration

5.1-Channel Setup

Conﬁguration

2.1-Channel

Programs

Dolby Virtual

Speaker Wide

(default)/Dolby

Virtual Speaker

Reference/Stereo

Original (default)/

Dolby PLII Movie/

Dolby PLII Music/

Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker

Reference/Stereo

Original (default)/

Dolby PLII Movie/

Dolby PLII Music/

Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker

Reference/Stereo

3.1-Channel

Programs

Dolby Virtual

Speaker Wide

(default)/Dolby

Virtual Speaker

Reference/Stereo

Original (default)/

Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker

Reference/Stereo

Original (default)/

Dolby PLII Movie/

Dolby PLII Music/

Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker

Reference/Stereo

4.1-/5.1-/6.1-

Channel

Programs

Dolby Virtual

Speaker Wide

(default)/Dolby

Virtual Speaker

Reference/Stereo

Dolby Virtual

Speaker Wide

(default)/Dolby

Virtual Speaker

Reference/Stereo

Original (default)/

Dolby Virtual

Speaker Wide/Dolby

Virtual Speaker

Reference/Stereo

To switch between the available surround-sound modes for the program currently

playing, press the Surround button. Each press of the Surround button will change to the

next available mode in line. A pop-up display will appear on the TV, showing the modes

as you cycle through them.

Listening Through Headphones

Your BDS receiver’s headphone connection accepts a standard 1/8-inch (3.5mm) stereo

headphone plug. When you insert the headphone plug into the connector, the receiver’s

speaker outputs will mute; the HDMI audio output will not mute.

When headphones are connected to the receiver’s Headphone jack, pressing the remote’s

Surround button cycles between these two modes:

• HARMAN headphone, which virtualizes a multichannel surround soundtrack down to

two channels. This mode retains the soundtrack’s original directional cues, allowing

you to enjoy an enveloping surround-sound experience on any ordinary pair of stereo

headphones.

• Headphone Bypass, which downmixes surround-sound programs into normal

stereo. This mode does not retain any multichannel directional cues that may be in

the original surround-sound program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 375 -SET Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 375 -SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info