Bedienungsanleitung Harman Kardon CDR 30 (Seite 4 von 26) (Englisch)

502658

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

4 SAFETY INFORMATION

Safety Information

Verify Line Voltage Before Use

Your CDR 30 has been designed for use with

220- to 240 Volt AC current. Connection to a

line voltage other than that for which it is

intended can create a safety and fire hazard and

may damage the unit.

If you have any questions about the voltage

requirements for your specific model, or about

the line voltage in your area, contact your selling

dealer before plugging the unit into a wall out-

let.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC

outlet, always pull the plug, never pull the cord.

If you do not intend to use the unit for any con-

siderable length of time, disconnect the plug

from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside

this product. Opening the cabinet may present a

shock hazard, and any modification to the prod-

uct will void your guarantee. If water or any

metal object such as a paper clip, wire or a

staple accidentally falls inside the unit, discon-

nect it from the AC power source immediately,

and consult an authorized service station.

CAUTION: The CDR 30 uses a laser system. To

prevent direct exposure to the laser beam, do

not open the cabinet enclosure or defeat any of

the safety mechanisms provided for your protec-

tion. DO NOT STARE INTO THE LASER BEAM. To

ensure proper use of this product, please read

this owner’s manual carefully and retain it for

future use. Should the unit require maintenance

or repair, please contact your local Harman

Kardon service station. Refer servicing to quali-

fied personnel only.

Installation Location

■ Place the unit on a firm and and level surface

that can support the weight of the product.

■ Make certain that proper space is provided

both above and below the unit for ventilation.

If this product will be installed in a cabinet or

other enclosed area, make certain that there

is sufficient air movement within the cabinet.

■ Do not place the unit directly on a carpeted

surface.

■ Avoid installation in extremely hot or cold

locations, or an area that is exposed to direct

sunlight or heating equipment.

■ Avoid moist or humid locations.

■ Do not obstruct the ventilation slots on the

top of the unit, or place objects directly over

them.

Cleaning

When the unit gets dirty, wipe it with a clean,

soft dry cloth. If necessary, wipe it with a soft

cloth dampened with mild soapy water, then a

fresh cloth with clean water.Wipe dry immedi-

ately with a dry cloth. NEVER use benzene,

aerosol cleaners, thinner, alcohol or any other

volatile cleaning agent. Do not use abrasive

cleaners, as they may damage the finish of metal

parts.

Moving the Unit

IMPORTANT NOTE: To avoid damage to the

CDR 30 which may not be covered by the war-

ranty, be certain that all discs are removed from

the unit before it is moved. Once the CDR 30 is

installed, discs may be left in the unit when it is

turned off, but the unit should NEVER be moved

with discs left in either deck.

Important Information for the User

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio communica-

tion. However, there is no guarantee that harm-

ful interference will not occur in a particular

installation. If this equipment does cause harm-

ful interference to radio or television reception,

which can be determined by turning the equip-

ment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equip-

ment and receiver.

■ Connect the equipment into an outlet on a

circuit different from that to which the receiv-

er is connected.

■ Consult the dealer or an experienced radio/TV

technician for help.

Unpacking

The carton and shipping materials used to pro-

tect your new CD recorder during shipment were

specially designed to cushion it from shock and

vibration.We suggest that you save the carton

and packing materials for use in shipping if you

move, or should the unit ever need repair.

If you do not wish to save the packaging materi-

als, please note that the carton and other sec-

tions of the shipping protection are recyclable.

Please respect the environment and discard

those materials at a local recycling center.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon CDR 30 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info