502658

Harman Kardon CDR 30 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
6 FRONT PANEL CONTROLS
Front Panel Controls
$
Record (CDR) Deck Open/Close:
Press this button to open or close the Record
Drawer
%
.
%
Record (CDR) Deck: This Disc Deck is used
to record or play CD, MP3, CD-R and CD-RW
discs.
^
Optical Digital Input: This jack accepts
the digital audio input signal from a compatible
digital audio product and should be connected
directly to the optical digital audio output on a
CD, MD or DVD player or any other compatible
digital source.To select this input, press the
Input Select Button
ı
until OPTICAL
FRONT appears in the Time/Message
Display
F
. Note that the cover with the “eye”
icon must be removed before the input is used.
Save the cover and replace it when the jack is
not in use to prevent dust from entering the jack
and degrading the input’s performance.
&
Coaxial Digital Input: This input may be
used to connect the coaxial digital output on a
CD, MD or DVD player or any other compatible
digital source to the CDR 30 for digital re-
cording. To select this input, press the Input
Select Button
ı
until COAXIAL FRONT
appears in the Time/Message Display
F
.
*
Analog-Record Level Control: The con-
trol is used to adjust the input level when mak-
ing recordings from analog sources such as cas-
settes, or when CDs are recorded in an analog
mode. See page 23 for more information on
record levels.
(
CDR Deck Play/Select: This button has
two functions. It may be pressed when a stan-
dard CD is in the Record Deck to put the
machine in play, or it may be used to enter a
selection or start certain record functions.
Ó
CDR Deck Stop: Press this button to stop
the CD in the Record Deck.
Ô
CDR Deck Pause: When the Record Deck is
in the Play mode, pressing this button will pause
the disc. If the disc has previously been paused,
pressing this button will restart the playback.
Digital Level Controls: These buttons
increase or decrease the record level when a
digital recording is being made. Press both but-
tons briefly and then release them to change
from manual to automatic digital recording level
control. See page 23 for more information on
digital recording levels.
Ò
MP3 Select Button: When a “Multisession”
disc containing both standard CD audio and
MP3 tracks is playing, the unit will default to
play of the standard CD audio tracks. Press this
button to play the MP3 tracks.
Ú
CDR Deck Program Button: Press this
button to begin the programming sequence for a
disc in the CDR deck. See page 19 for more
information on programmed playback.
Û
CDR Deck Next Track: This button has
two functions.When a disc is playing in the
Record Deck
%
, press and hold this button to
play the disc in a fast-forward mode to quickly
locate a desired passage.At any time, tapping
the button and quickly releasing it will move to
the next track on a disc in play.
When a disc is stopped, each press will move
forward one track for programming or play (see
page 17 and 19 for locating tracks).
Ù
CDR Deck Previous Track: This button has
two functions.When a disc is playing in the
Record Deck
%
, press and hold this button to
play the disc in a fast reverse mode to quickly
locate a desired passage.At any time, tapping
the button and quickly releasing it will move to
the beginning of the current track, and the next
press will move to the previous track.When a
disc is stopped, each press will move back one
for programming or play (see page 17 and 19
for locating tracks).
ı
Input Select: Press this button to select the
input source (coaxial rear, optical rear, coaxial
front, optical front and analog) for recording.
See page 22 for more information on input
selection.
ˆ
CDR Deck Display Select: Press this but-
ton to cycle through the time display options for
the Record Deck. See page 18 for more informa-
tion on the time display.
˜
Information Display: The indicators in the
Information Display provide status reports on the
operation of the CDR 30. See page 7 for com-
plete explanations of each indicator.
¯
Remote Sensor: The IR sensor that
receives the commands from the remote control
is behind this area. Do not cover or obscure this
part of the front panel to avoid any malfunction
with the remote.
˘
CDP Deck Display Select: Press this but-
ton to cycle through the time display options for
the Play Deck. See page 18 for more information
on the time display.
¸
Dual/Single Play Select: Press this button
to enable both CD decks to play at the same
time and function as separate, independent CD
units (Dual mode), or to have the unit play
through all the tracks on the disc in one deck
and then switch to the other (Single mode). In
the Dual mode it is also possible to record from
an external source in the CDR while the CDP
Deck is functioning as a standard CD player. See
page 18 for more information on dual-play
capability.
W
CDP Deck Next Track: This button has two
functions.When a disc is playing in the Play
Deck
3
, press and hold this button to play the
disc in a fast-forward mode to quickly locate a
desired passage.At any time, tapping the button
and quickly releasing it will move to the next
track on a disc in play.
When a disc is stopped, each press will move
forward one track for programming or play (see
page 17 and 19 for locating tracks).
X
CDP Play-Deck Previous: This button has
two functions.When a disc is playing in the Play
Deck
3
, press and hold this button to play the
disc in a fast-reverse mode to quickly locate a
desired passage.At any time, tapping the button
and quickly releasing it will move to the begin-
ning of the current track, and the next press will
move to the previous track.When a disc is
stopped, each press will move back one for pro-
gramming or play (see page 17 and 19 for locat-
ing tracks).
Y
CDP Deck Program Button: Press this
button to begin the programming sequence for a
disc in the CDR deck. See page 19 for more
information on programmed playback.
Z
CDP Deck Pause: When the CDP Deck is
running, pressing this button will pause the disc.
If the disc has previously been paused, pressing
this button will restart the playback.
a
CDP Deck Play Button: Press this button
to begin playback of a CD in the CDP Deck.
b
CDP Deck Stop Button: Press this button
to stop the CD in the CDP Deck.
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon CDR 30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info