Bedienungsanleitung Harman Kardon CDR 30 (Seite 19 von 26) (Englisch)

502658

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

PROGRAM PLAY 19

Program Play

The CDR 30’s advanced programming system

enables you to program certain tracks for play or

the order in which tracks are played or dubbed,

to repeat one track or all tracks, or to repeat any

segment of a disc without regard to track num-

bers.

Programming Play Lists

To program certain tracks or the order of play-

back for the tracks on a disc, insert the disc, let

the unit read the Table of Contents information,

and wait until the disc has stopped and the num-

ber of tracks and total running time is displayed.

Next, select the deck that will be programmed by

pressing the CDP Select button

on the

remote for the Play Deck

or the CDR

Select button

on the remote for the

Record Deck

To begin the programming sequence, press the

Program Button

ÚY

and note that the

Prog Indicator

will light and the Time/

Message Display

will show 00 P-01for

standard CD Audio discs and 000P01 for MP3

discs.

Next, enter the track numbers to be played by

pressing the Numeric Keys

. For two-digit

track numbers, be certain to enter the second

digit within three seconds after the first number

is entered. As each track is entered, the display

will blink three times, alternating between two

displays (blinking and alternating will not be with

MP3 discs). The first display will show the track

number just entered on the left side of the

Time/Message Display

under the Track

Indicator

, while the right side will flash the

number of steps that have been programmed.

For example, after programming the first step to

be track number 3, the display will flash 03P-

01for CDs or 003P01for MP3 discs.

With standard Audio CDs, alternating with the

track number and program step will be a display

of the track and the total running time of all

tracks that have been programmed so far. For

example, a display of 06 11:25 will indicate

that track number six was the last track pro-

grammed, and that the total time of all tracks so

far is 11 minutes and 25 seconds.The Total

Time Indicators

will flash with this dis-

play to remind you of the display’s contents.

These displays will alternate three times, and

then show a steady display of the last track and

the number of steps programmed.

Now you can continue to add tracks in the order

you wish to have them played until the program-

ming session is complete.You may add up to 32

tracks, repeating a track if desired, as long as the

total number does not exceed 32. If you exceed

the 32 track limit, the display will read FULL.

Tracks may also be added using the Next

ÛW

and Previous buttons

ÙX

locate the track, and the Program button

ÚY

to enter that track to the programmed

sequence.

When the complete list of tracks has been

entered, press the Play button

.The

tracks will then play in the order they have been

entered.

Note that a programmed list of tracks may also

be recorded if the disc being programmed is in

the Play Deck

. Follow the instructions on

page 21 for complete information on recording

and dubbing.

To escape from the program play mode and

return to normal play follow these steps: While

the program is playing, the Program button

ÚY

must be pressed and the unit will

continue to play tracks in normal mode. And

while the player is stopped the Stop button

Ób

must be pressed. In both cases the

Prog Indicator

will go out.

Checking, Editing and Clearing

Programmed Play Lists

Once you have entered a program list it will

remain in the unit’s memory until the disc is

removed or the unit is turned off. Thus, if you’ve

played through a program list, simply press the

Play button

again to replay the list

while the Prog Indicator

is lit (otherwise

first press Program

ÚY

). If you find that

you wish to check the list or make changes, that

is also possible by following a few simple steps:

To scroll through a program list, note that the

Prog Indicator

is lit (otherwise press

Program

ÚY

) and press the Program

Check button

. Each press of the button will

move through the tracks that have been pro-

grammed.The display will alternate between the

track number plus the program step number

(e.g., 12 P-03 for CD Audio discs, or

012P03for MP3 discs, tells you that Track

12 on the disc is the 3rd program step) and the

track number plus the total running time so far in

the program (e.g., 1216:04 tells you that

at this point you have programmed a total of 16

minutes and 4 seconds of material).

Note that alternating indication of total running

time of all programmed tracks is not available

with MP3 discs, even when the TTL TIME

ONindication mode is selected (see page 17).

At any point in the list you may overwrite a pro-

grammed track number by simply entering the

new track number using the Numeric Keys

. Alternatively you can modify the track num-

ber to be changed with the Next

ÛW

and

ÙX

buttons and enter it by

pressing the Program button

ÚY

.In

both cases the formerly programmed track num-

ber will be overwritten and automatically deleted

from the program list.To add a track number

(possible only to the end of a program list), press

the Program Check button

repeatedly

until the track number 00(or 000 with MP3

discs) is displayed, then enter the track number

you wish to add with the Numeric buttons

directly or press the Next or Previous buttons

and then the Program button

ÚY

, as described above.

To remove a step in the program, first use the

Program Check button

to locate the track

you wish to delete. Next, press the Clear button

. The information in the display will blink and

the step will be removed from the

program list.

Program steps need not be deleted

in any order;

as long as you have located a step in the pro-

gram list, it may be erased.

To remove a total program list when the disc is

stopped, press the Clear button

repeatedly

(will delete one track after another, starting with

the first track programmed) until the appropriate

Prog Indicator

deletes or simply open and

close the disc drawer.Whenever a disc is re-

moved or the unit is turned off, the program list

is erased.

Repeat Play

The CDR 30’s programming system enables you

to repeat either a single track on a disc, the

entire disc (or all programmed tracks), or a spe-

cially programmed passage that you select.

Repeat One Track

To repeat the track you are currently listening to,

press the Repeat button

and note that the

Repeat Mode Indicator

will light Repeat

1. If the track is changed by using the Next/

Previous Skip Buttons

ÛÙWX

or the Numeric buttons

while the Repeat

1 mode is active, the new track will now be

repeated.

Once Repeat 1 playback has been started, it will

continue until the unit is stopped by pressing the

Stop button

Ób

, or the disc deck is

opened by pressing the appropriate Open/Close

button

. When playback is

stopped, the Repeat mode is turned off automat-

ically.

Harman Kardon CDR 30 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info