Bedienungsanleitung Harman Kardon HD990 (Seite 7 von 16) (Englisch)

502536

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

HD 990

HD 990 Remote Control Functions

aPower Off

bPower On

cNumeric Controls

dProgram Button

eClear Button

fRepeat Button

gRepeat A › B Button

hSkip Buttons

iSearch Buttons

jPlay/Pause Button

kStop Button

l+10/–10 Buttons

mRandom Button

nTime Button

oCheck Button

pOpen/Close Button

qDisplay Button

rFolder Buttons

sSource Button

tInfo Button

Power Off

: Press this button to put the unit in the Standby mode.

Power On:

Press this button to turn on the CD player. Note that in order for the

Power On button to operate, AC power must be applied to the unit, and the

Status Mode

Indicator

2 should glow orange (see page 9 for more information). The unit will also

turn on when the Play 4jor Open/Close 3pbutton is pressed.

c Numeric Controls: Press these buttons to select a specific track on a disc. The unit

will immediately search for the track and begin to play it. For tracks 1 through 9 on a disc,

you need only press the desired number. For tracks 10 and above, the second and third

digit of the number must be entered within two seconds of the first digit. (See page 9 for

more information.) These buttons are also used to enter track numbers into the memory

for pre-programmed play lists. (See page 11 for complete information on programming

the CD player.)

d Program Button: Press this button to begin the process of programming the CD

player to play the tracks on a disc in a speciﬁc order. Once the button is pressed, enter

each of the desired track numbers in quick succession using the Numeric Controls button

c. When you have entered the tracks to be played, press the Play button j to begin

the programmed sequence. (See page 11 for complete information on programming the

CD player.)

Clear Button

: Press this button to remove selected or all tracks from the

programmed sequence. (See page 11 for complete information on programming the CD

player.)

fRepeat Button: Press this button once to repeat only the track that is currently being

played, and note that the Repeat and One indicators will light in the Information Display.

Press the button a second time so that the Repeat and All indicators are illuminated to

repeat all tracks on the disc. (See page 12 for more information on Repeat Play.)

Repeat A

B Button

: Press this button to repeat a segment of the disc. Press the

button once to mark the start of the portion to be repeated. Press it again at the end of

the desired sequence. The marked passage will play continuously until the Stop button

k is pressed. (See page 12 for more information on Repeat Play.)

h Skip Buttons: Press one of these buttons to move to the next track ·, or to

move back to the previous track ‡ﬁ (see page 10).

i Search Buttons: Press one of these buttons to search forward — or

backward‚ through a disc to locate a particular portion of the selection being

played. Holding the buttons pressed for some seconds will increase the search speed

(see page 10).

Play/Pause Button

: Press this button to start the playback of a CD. If the CD

drawer is open, pressing this button will automatically close the drawer. Press this button

once during playback to momentarily stop a disc. When the button is pressed again, the

disc will resume play at the point it was stopped.

k Stop Button: Press this button to stop the disc currently being played or to escape

from the program mode (see page 11 for complete information).

+10/–10

Buttons: Press the +10 button to move to the 10th track after the current

track playing. Press the –10 button to move to the 10th track before the track currently

playing.

m Random Button: Press this button to have all of the tracks played in a random order.

(See page 9 for more information.)

n Time Button: Press this button to select the time display. In normal operation, the

display will show the running time of a track being played. Press the button once to check

the time remaining for the track in play. Press the button a third time to view the elapsed

time for the CD being played, and a last time for the total play time remaining for the disc

in play (see page 10).

o Check Button: Press this button to check the order of tracks programmed into the

CD player’s memory. (See page 11 for complete information on programming the CD

player.)

Open/Close Button

: Press this button to open or close the disc drawer. The drawer

may also be closed by pressing the Play button 4jor by gently pressing the edge

of the drawer. However, we do not recommend pushing the drawer, as damage to the

transport mechanism may result.

q Display Button: Press this button once to dim the front panel display to half

brightness. Press it again to turn the display lights off completely. Another press will

return the display to normal brightness.

Folder Buttons

: Press the Folder + button to move to the next folder with MP3

data, and the Folder – button to move to the previous folder with MP3 data.

s Source Button: Press this button to switch between the CD player’s output and the

output of other sources connected to one of the digital inputs 5 (see page 10 for more

information).

t Info Button: Pressing this button consecutive times shows the different CD text

information available on a CD, or ID3 and other information available on a disc with MP3

data. To return to normal Track number/Time indication, press the Time button n. (See

page 10 for more information.)

Remote Control Functions

Harman Kardon HD990 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HD990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info