Bedienungsanleitung Harman Kardon HK 3385 (Seite 19 von 28) (Englisch)

502808

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

INSTALLATION

Video 2 Source

The Video 2 source is used only for playback. Since the remote is

preprogrammed to operate a Harman Kardon DVD player when the

Video 2 source is selected, we recommend that you connect a DVD

player to the Video 2 Inputs.

You may have observed that the HK 3385 is not equipped with digital

audio inputs or surround sound decoding. If you prefer the complete

home theater experience, you may wish to consider purchasing a full-

featured Harman Kardon AVR Series audio/video receiver. However, we

hope you will find that using a DVD player with the HK 3385 in smaller

settings, such as a bedroom or den, surpasses the audio performance

of most televisions, including those with onboard stereo speakers.

Connect the left and right analog audio outputs of the DVD player to

the Video 2 Audio Inputs on the HK 3385. Then connect the composite

video output of the DVD player, usually colored yellow, to the Video 2

Video Input. See Figure 16.

Figure 16 – Video 2 Audio and Video Inputs

NOTE: If you receive your television programming using your TV

with an antenna or direct cable connection, then you will need

to connect the analog audio (if available on your TV) outputs

to the Video 2 Analog Audio Inputs. Do not connect any video

output on the television set to any Video Input on the receiver.

See Step Five for information on connecting the receiver’s Video

Monitor Outputs to the television.

Video 3 Source

The Video 3 source is used only for playback.The Video 3 source has

two sets of input jacks, one located on the HK 3385’s rear panel and

one set on the front panel. If you wish to connect a video device more

or less permanently, you may prefer to connect it to the rear-panel

inputs for a neater appearance. You may prefer to reserve the front-

panel inputs for devices connected on a temporary basis, such as a

video-capable iPod (not included), a camcorder, a game console, or

another type of media player with analog audio and/or video outputs.

You may connect devices to both the front- and rear-panel inputs simul-

taneously. To select either device, press the Video 3 Source Selector on

the HK 3385’s front panel or remote repeatedly. When the dot to the

left of the Video 3 Input Indicator (on the front panel of the HK 3385)

is lit steadily, the rear-panel inputs are active. When the dot flashes, the

front-panel inputs are active.

Connect the left and right analog audio outputs of your device to the

corresponding Video 3 Inputs on either the front or rear panel, and if

available, connect the composite video output of the device to the

Video 3 Video Input on the same panel. See Figure 17.

Figure 17 – Front- and Rear-Panel Video 3 A/V Inputs

To connect an iPod to the Video 3 Inputs, insert the 1/8" mini plug on

the A/V cable included with the HK 3385 into the iPod’s headphone

jack. Insert the left and right analog audio plugs on the other end of

the A/V cable into the Video 3 Audio Inputs on the front of the receiver.

If the iPod is capable of playing videos or displaying images, insert the

composite video plug of the A/V cable into the Video 3 Video Input.

Since the remote is preprogrammed to operate a Harman Kardon DVD

player when the Video 3 source has been selected, use the original

remote to control other components, or operate an iPod using its own

controls.

Step Five – Connect the Video Display

Only video connections should be made between the receiver and

your video display (TV), unless your TV is the source for your television

programming (see note above).

To view video or images played by your source devices, connect the

Video Monitor Output of the HK 3385 to a Composite Video Input on

your television or video display. See Figure 18. Consult the manual for

your TV so that you understand how to select and display the correct

Video Input.

Figure 18 – Video Monitor Output

Step Six – Connect the Remote IR Input and

Output (Optional)

The HK 3385 is equipped with a Remote IR Input and a Remote IR

Output to facilitate use of your system with a remote control in a variety

of situations.

When the HK 3385 is placed in such a way that aiming the remote at

the front-panel IR sensor is difficult, such as inside a cabinet or facing

away from the listener, you may connect an external IR receiver, such

as the optional Harman Kardon HE 1000, to the Remote IR Input jack.

If any of your source devices are equipped with a compatible Remote IR

Input, you may use a 1/8" mini-plug interconnect cable (not included) to

HK 3385 OM 4/13/07 12:03 PM Page 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HK 3385 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info