Bedienungsanleitung Harman Kardon HK3390 (Seite 11 von 28) (Englisch)

502537

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

REMOTE CONTROL FUNCTIONS

The HK 3390 remote is capable of controlling six devices, including

the HK 3390 itself. The remote is preprogrammed at the factory to

operate most Harman Kardon DVD, CD and CDR players. Each time you

wish to use the codes for any component, first press its Selector Button.

This changes the button functions to the appropriate codes.

Phono: Controls only the HK 3390 when a turntable is in use.

Video 1: Controls the Harman Kardon DMC 1000 digital media server.

Video 2 and 3: Controls DVD players. Each source uses a slightly

different code set. Test the remote on your Harman Kardon DVD player,

and refer to Table A3 in the appendix. Connect the DVD player to the

source inputs corresponding to the code set that correctly operates

the device.

Tape: Controls CD recorders.

CD: Controls CD players.

AM/FM: Controls the HK 3390 and its internal tuner only.

The functions specific to the HK 3390 are always available: Main Power

On and Off, Speaker 1/2, source selection, Mute, Sleep, Dimmer and

the Volume Controls.

Any given button may have different functions, depending on which

component is being controlled. Some buttons are labeled with these

functions. For example, the Track Skip Buttons are labeled with the

transport control icons printed on the buttons themselves, and these

functions are active when a CD or DVD player is in use. The Preset

indications appear above these buttons, and those commands are

active when the HK 3390’s tuner is in use. See the Appendix for

listings of the different functions for each type of component.

IR Transmitter Lens: As buttons are pressed on the remote,

infrared codes are emitted through this lens. Make sure it is pointing

toward the component being operated.

Power Off Button: Press this button to turn off the HK 3390 or

another device.

Power On Button: Press this button to turn on the HK 3390 or

another device.

Speaker 1/2: Press the Speaker1 Button to enable the HK 3390 to

output audio to the speakers connected to the Speaker 1 Outputs, and

press the Speaker 2 Button to enable the Speaker 2 Outputs. You may

enable or disable both sets of speaker outputs simultaneously.This

feature is a convenient way of hearing audio in more than one room at

a time, although the same source material will be played through both

sets of speakers.

Source Selectors: Press one of these buttons to select a source

device, which is a component where a playback signal originates, e.g.,

DVD, CD or the tuner. This will also turn on the receiver and switch the

remote to the codes that operate the source device.

NOTE: The Video 3 source device may be connected to either

the front- or rear-panel connectors. To select the desired device,

press the Video 3 Source Selector repeatedly. The VIDEO 3

message indicates that the rear-panel inputs are active, and

the VIDEO F message indicates the front-panel inputs have

been selected.

FM Mode: This button toggles between Stereo and Mono modes

when an FM station is tuned.

Auto Preset: The Auto Preset feature enables you to automatically set

presets for all available FM radio stations in your area with a single button

press. To start the process, make sure the FM tuner has been selected as

the source. Press and hold this button. The AUTO PRESET message will

appear as the HK 3390 tuner scans through all FM stations with acceptable

signal quality and programs them into the presets. If there are fewer than

30 stations, the tuner will cycle through again, filling up the higher preset

slots with the same stations. The scan will stop when all 30 presets have

been filled, or after two scans through the FM band.

Numeric Keys: Use these buttons to enter radio station frequencies when

using the tuner (after pressing the Direct Button), or to select station presets.

Direct: Press this button before using the Numeric Keys to directly

enter a radio station frequency.

Clear: Press this button to clear a radio station frequency you have

started to enter.

Memory: After you have tuned a particular radio station, press this

button, then the Numeric Keys, to save that station as a radio preset.

Menu: This button has no effect on the HK 3390, but is used with

some source devices to access the source’s setup menus.

Navigation (

⁄

‹

›

) and OK Buttons: These buttons have

no effect on the HK 3390, but are used to make selections within the

on-screen menu system for some source devices. The OK Button

transmits the Random Play command when used with CD players.

Preset Scan: Press this button once to scan through the stations you

have previously programmed as presets. Each station will play for five

seconds before the tuner skips to the next preset station. Press the button

a second time to select the current station. If no presets have been

programmed, the 0 PRESET message will be displayed.

Disc Menu: This button has no effect on the HK 3390, but is used

with some DVD players to access the DVD disc’s menus.

Volume Controls: Use this control to raise or lower the volume,

which will be shown in decibels (dB) in the Message Display.

Mute Button: Press this button to mute the HK 3390’s speaker and

headphone outputs temporarily.To end the muting, press this button

or adjust the volume. Muting is also canceled when the receiver is

turned off. When the Subwoofer Trigger Output is connected to the

correct input on the subwoofer, and the corresponding Subwoofer Link

Switch is on, muting the HK 3390 will remove the trigger signal, turning

off the subwoofer’s amplifier to conserve energy. When normal listening

resumes, the trigger signal will be reactivated, turning on the subwoofer.

HK1695 3390OM 6/13/08 12:12 PM Page 11

Harman Kardon HK3390 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HK3390

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info