Bedienungsanleitung Harman Kardon HS 280 (Seite 17 von 30) (Englisch)

456576

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

16 17

ENGLISH

Coaxial 1/Coaxial 2 In and Optical 1/Optical 2 In: If you have an audio-only

digital source component (such as a CD changer or video game), you can connect it to

one of these inputs, as shown in the illustration under Connecting Audio Sources, on

page 16. When using the Optical 1 and Optical 2 digital connections, gently push the

cable connector through the panel connector’s built-in shutter until it is firmly seated

in the connector.

NOTE: Use only one type of digital connection for each source component.

Connecting an Audio Recorder

Line Out: If you have an analog recorder such as a cassette deck, connect its record

inputs to the HS 280/HS 210’s Line Out jacks. NOTE: You should connect the recorder’s

analog outputs to the HS 280/HS 210’s Line 1 In or Line 2 In jacks.

Coaxial Out: If you have a digital recorder such as a CD-R or MiniDisc, connect its

coaxial input to the HS 280/HS 210’s Coaxial Out jack.

Connecting to a Local Area Network (LAN)

Use a CAT 5 RJ45 network cable (not supplied) to connect the HS 280/HS 210’s

Ethernet port directly to a network router, a network switch or an Ethernet network

wall jack.

NOTE: For the HS 280/HS 210 to interface with a networked computer, that computer

must be running UPnP (Universal Plug and Play)-compliant media software such as

Windows Media Player, MediaLink or EyeConnect™.

Laptop

Computer

Desktop

Computer

Local-Area

Network (LAN)

Network

Modem

Receiver

CAT 5 RJ45 Cable

(not supplied)

IMPORTANT: The HS 280/HS 210’s Ethernet connection will not support a proxy

network.

Connecting the AC Power

The HS 280/HS 210 receiver comes with a detachable AC power cord. This type of cord

makes it easier for you to install and connect all other system wiring to the receiver’s

rear panel. The HKTS200SUB subwoofer has a non-detachable power cord. Plug the

subwoofer’s power cord into a working, unswitched AC outlet.

NOTES:

The power requirement for the

•

HS 280/HS 210 receiver is 100–240V AC ~

50/60Hz, 300W. The power requirement for the HKTS200SUB subwoofer is

220–240V AC ~ 50/60Hz, 200W.

Connecting to a power source other than the ones listed above may damage the

•

receiver or subwoofer, or cause abnormal operation.

Before connecting the AC power cords to a wall outlet, confirm that all of the

•

speaker connections, video connections and audio-component connections have

been made correctly.

Connect the female end of the receiver’s detachable power cord to the receiver’s

•

AC Power Input connector. Plug the other end into a working, unswitched AC

outlet.

Power Cord

(female end)

Power Chord

(female end)

The receiver’s Power Indicator will turn red, indicating that the receiver is in the

•

standby mode.

The subwoofer’s LED will not illuminate until it receives a turn-on signal. See

•

Subwoofer Controls and Connections, on page 9, for details.

Preparing the Remote Control

Installing the Batteries

The HS 280/HS 210’s system remote control uses three AAA batteries (supplied).

Insert the batteries as shown in the illustration, making sure to observe the correct

polarity.

––

–

A. Remove

Cover

B. Insert 3 AAA

Batteries

C. Replace Cover

Using the Remote Control

When using the remote, remember to aim it toward the HS 280/HS 210’s front panel.

Make sure that no objects, such as furniture, block the remote’s view of the receiver.

Bright lights, fluorescent lights, and plasma-video displays may interfere with the

function of the remote.

The remote has a range of about 20 feet (6.1m), depending on the lighting

•

conditions.

You can use the remote at an angle of up to 30° to either side of the

•

HS 280/

HS 210.

If the remote seems to operate intermittently, or if pressing a button on the

•

remote does not cause one of the source buttons to illuminate, make sure that the

batteries are inserted correctly, or replace all three batteries with new ones.

Programming the Remote Control

You can also program the remote so it will control two additional components –

typically your TV and a video source such as a satellite or cable receiver – in addition

to controlling the HS 280/HS 210 receiver.

To control the TV and video component, you can teach codes from the TV and video-

component remotes onto the HS 280/HS 210 remote buttons shown shaded in the

following illustration:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HS 280 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HS 280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info