Bedienungsanleitung Harman Kardon HS 280 (Seite 19 von 30) (Englisch)

456576

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

18 19

ENGLISH

Use the up cursor/down cursor buttons to navigate through the menu list. When

•

an item is highlighted, its icon will turn bright and its name will become larger.

To select a highlighted item, press the Enter button. The screen will change

•

depending on your selection.

To display choices for the current screen (if available), press the right cursor

•

button.

To return to the previous screen, press the left cursor button.

•

Settings Menu

Before using the HS 280/HS 210, you will need to set the receiver’s various

video, audio and other functions. Scroll down the Activity menu until Settings is

highlighted, then select it. The Settings menu will appear. You will use the various

Settings menu items to configure your HS 280/HS 210 to work as you want it to with

your TV and other components.

Video Settings

Aspect ratio: Select the aspect ratio of your TV or video display (16:9 or 4:3).

TV standard: Select your TV or video display’s TV standard (automatic or PAL).

If you have an NTSC or multi-standard TV, use the Automatic setting. NOTE: If you

make an incorrect setting in this menu, the signal to your TV will be temporarily lost,

but you can change to the correct setting by using the HS 280/HS 210’s front-panel

Information Display.

Output: Select which video connection (HDMI or analog) you are using between the

HS 280/HS 210 and your TV. NOTE: The HS 280/HS 210 does not output both HDMI and

analog video simultaneously.

Resolution (HDMI only): Select the highest resolution your TV can handle (480p

(NTSC), 576p (PAL), 720p, 1080i or 1080p). NOTE: This setting is available only if you

selected HDMI as the output type.

SCART (analog only): Select the type of video output that your TV will receive

via the SCART cable (S-Video or composite – CVBS – video). NOTE: This setting is

available only if you selected Analog as the output type.

Audio Settings

Bass, Treble: Increases or decreases the level of bass (low frequencies) or treble

(high frequencies). You can select from –10dB to +10dB in 1dB increments.

Subwoofer: Increases or decreases the subwoofer volume. You can select from

–10dB to +10dB in 1dB increments.

Dynamic range: This setting brings the loud and quiet parts of a movie or music

closer to the same volume. This setting lets you turn up the volume so the quiet parts

are audible but the loud parts won't disturb others. NOTE: This feature works only

with Dolby Digital programs that have been specially encoded. Three settings are

available:

Min: Does not change the original playback. You should use it when the volume

•

setting in the listening room may be as loud as you desire.

Half: Applies a moderate amount of compression so that louder passages are a

•

little bit quieter.

Max: Applies more compression so that louder passages are much quieter.

•

Delay: This setting indicates the amount of delay of the audio output relative to the

video output, which eliminates the “out-of-sync” quality that sometimes occurs when

the video source component or the video display processes a video signal. The default

setting of 90ms (90 milliseconds) should be correct for most programs. However, if

you wish to improve synchronization for a particular program, you can change the

setting to anywhere between 0ms (no delay) and 150ms, in 10ms increments.

HDMI Audio to TV: This setting turns the HDMI audio output to your TV on and

off. We recommend turning this function off, so you can take full advantage of the

superior audio capability of your HS 280/HS 210 system’s receiver and speakers.

TV audio input: Set this function to the input to which you have connected your TV’s

audio output. When you press the remote’s TV button, TV will become the active audio

input and you can use the remote to control your TV. See Connecting Audio Sources,

Line 1/Line 2 In, on page 16.

NOTE: If you’ve connected the TV to the HS 280/HS 210 using the SCART cable, set this

function to SCART. Whenever the TV is turned on, it will send a signal to the HS 280/

HS 210, which will then automatically switch to the SCART input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HS 280 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon HS 280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info