456600

Harman Kardon RCP 7 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
6
XM Radio Button: Press this button to select XM Satellite Radio as
the source. You will need to have purchased and activated an XM
®
antenna
module, and you will also need to subscribe to the XM Radio service.
Visit www.xmradio.com for more information.
Learn Button: The RCP 7 remote is capable of “learning” individual
IR codes from the original remote that came with your TV or a device
that is connected to any of the source inputs. See the Programming
Sources section for instructions on learning remote codes.
Test Tone: Press this button to activate the test tone for manual
output-level calibration.
TV/Video/Video Off: This button has no effect on the receiver,
but is used to switch video inputs on some video source components.
When the DVD player has been selected (by pressing the DVD Input
Selector), pressing this button disables the DVD 48’s video output to
avoid “burning in” menus or still images on sensitive video displays. This
feature is particularly useful when listening to CDs or other audio-only
presentations.
Sleep/Audio Select: Press this button to activate the sleep timer,
which shuts off the receiver after a programmed period of up to
90 minutes.
When the DVD player has been selected, this button may be used to
select another audio format or language, if one is available on the disc.
Volume Controls: Press these buttons to raise or lower the volume,
which will be shown in decibels (dB) in the Message Display.
DSP Surround/Title: Press this button to select a DSP Surround
mode (Hall 1, Hall 2, Theater).
When the DVD player has been selected, this button serves the Title
function. When a DVD is playing, press this button to go back to the
main title menu for the disc. If you are playing a DVD-Audio disc that
contains other audio formats, such as linear PCM or Dolby
®
Digital 5.1
audio, pressing this button may enable you to switch playback from one
audio format to another.
On-Screen Display (OSD)/Group: Press this button to activate
the AVR 347’s on-screen menu system.
When the DVD player has been selected, this button serves the Group
function. Press it to select another group on a DVD-Audio disc for play-
back. See the DVD 48’s manual for a more detailed explanation.
Multiroom/HDMI: Press this button to control the multiroom system.
Three settings are available: MULTI ON/OFF, which is used to turn the
multiroom system on or off; MULTI LEVEL, which adjusts the volume of
the remote zone; and MULTI INPUT, which is used to select the source
input for the remote zone. See Multiroom Operation in the Advanced
Functions section of the AVR 347 manual for more information on using
the multiroom system.
When the DVD player has been selected, this button is used to turn
the DVD 48’s HDMI Output on or off. It has the opposite effect on the
DVD 48’s Component Video Outputs. See the DVD 48’s manual for
more information.
Channel Level/Disc Menu: Press this button to set the output
levels for each channel so that all speakers sound equally loud at the
listening position. This may be done while playing an audio selection, such
as a favorite CD, after you have calibrated the levels using the EzSet/EQ
™
process.
When the DVD player has been selected, this button serves the Disc Menu
function. While a disc is playing, press this button to view the disc’s menu.
This function is different from the DVD Setup function.
Speaker Setup/DVD Setup: Press this button to configure
speaker sizes; that is, the frequency-range capability of each speaker.
This may be done automatically by running the EzSet/EQ procedure,
or using the on-screen menu system, as described in the Advanced
Functions section of the AVR 347 owner’s guide.
When the DVD player has been selected, this button serves the DVD
Setup function. Press it to use the DVD 48’s on-screen menu system
to adjust the player’s configuration settings. This function is different
from the Disc Menu function.
Navigation and Set/Enter Buttons: These buttons are used
together to make selections within the AVR 347’s or DVD 48’s
on-screen menu system, or when accessing the AVR functions of
the four buttons surrounding this area of the remote – Channel Level,
Speaker Setup, Digital Input or Delay.
Digital Input Select/Drawer Open/Close: Press this button to
select the specific digital audio input (or analog audio input) you used
for the current source.
When the DVD player has been selected, this button is used to open
or close the disc drawer.
Delay/DVD Status: Press this button to set delay times that
compensate for placing the speakers at different distances from the
listening position, or to resolve a “lip sync” issue that may be caused by
digital video processing. This may be done automatically by running the
EzSet/EQ procedure, or using the on-screen menu system, as described
in the Advanced Functions section of the AVR 347 owner’s guide.
When the DVD player has been selected, this button serves the Status
function. Press it while a disc is playing to view the on-screen Status
Display, which provides a snapshot of the settings for the current disc.
See the DVD 48 owner’s manual for more information.
Numeric Keys: Use these buttons to enter radio station frequencies
or to select station presets. When the AM or FM band is in use, press
the Direct Button before entering the station frequency.
When listening to XM Radio, you may enter channel numbers without
first pressing the Direct Button; however, to access the preset stations,
you will need to use the Preset Stations Selectors. To access another
bank of XM presets, press the Set Button repeatedly until PRESET
SEARCH appears, then use the
⁄
/
¤
Buttons to select the letter of
the desired bank.
REMOTE CONTROL FUNCTIONS
RCP7 OM.qxd 3/23/07 4:15 PM Page 6
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon RCP 7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info