Bedienungsanleitung Harman Kardon RCP 7 (Seite 7 von 24) (Englisch)

456600

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Tuning Mode/Zoom: When listening to AM or FM radio, this button

toggles between Manual (one frequency step at a time) and Automatic

(seeks frequencies with acceptable signal strength) tuning modes. It also

toggles between Stereo and Mono modes when an FM station is tuned.

When listening to XM Radio, press the Tuning Mode Button once to view

the category name of the current channel. Additional presses will display

the artist, song title and channel name.

When the DVD player has been selected, this button performs the Zoom

function. Press it to zoom in on a DVD, VCD or JPEG image. Once the

on-screen indication of the zoom ratio disappears from the screen, you

may use the Navigation Buttons to explore the picture.

Memory/Program: After you have tuned a particular radio station,

press this button, then a Numeric Key, to save that station as a radio preset.

For XM Radio, the procedure for saving a preset is a little different. To

save the current channel in one of the 40 available preset locations,

press the Set Button repeatedly until PRESET SEARCH appears. Use

the

⁄

Buttons to select a letter (A through E) representing one of

the five banks of preset memory slots. Then press the Memory Button,

followed by a Numeric Key (1 through 8) for the precise preset memory

location you wish to save the channel in.

When the DVD player has been selected, this button performs the

Program function, which enables you to program a playlist that changes

the order in which tracks or chapters are played.

Tuning: Press these buttons to tune a radio station or XM Radio

channel. For the AM and FM bands, and depending on whether the

tuning mode has been set to Manual or Automatic, each press will either

change one frequency step at a time, or seek the next frequency with

acceptable signal strength.

Direct Station Entry/Angle: Press this button before using

the Numeric Keys to directly enter a radio station frequency (AM or

FM bands only).

When the DVD player has been selected, this button is used for the

Angle function. Press it during passages on a DVD where the director

has programmed multiple camera angles to view the alternate perspec-

tives. When a JPEG file is on-screen, each press of this button rotates

the image by 90 degrees clockwise.

Clear: Press this button to clear a radio station frequency you have

started to enter.

When the DVD player has been selected, this button may be used

to clear any on-screen displays from view.

Preset Stations/Page +/–: Press these buttons to select a preset

radio station.

For XM Radio, first press the Set Button repeatedly until PRESET SEARCH

appears, and then use the

⁄

Buttons to select the letter of the

desired bank of presets.

When the DVD 48 is being used to play a DVD-Audio disc, if the disc

contains still images associated with each track, press these buttons to

scroll through the images. The availability of this function depends on

how the DVD-Audio disc was authored.

Tone Mode/Return: Press this button to access the tone controls

(bass and treble). Use the Navigation Buttons to make your selections.

When the DVD player has been selected, press this button to return to

the previous setup menu, or to clear the display if the top-level menu is

on screen.

Disc Skip/Audio Mode: This button has no effect on the AVR 347,

but is used with some optical disc changers to skip to the next disc.

When the DVD player has been selected, each press of this button

toggles the DVD 48’s Analog Audio Output setting between Stereo and

Multichannel without requiring you to navigate to the Audio Setup menu.

In Stereo mode, a 2-channel downmix of the audio track is

available at both the 2-Channel Analog Audio Outputs and at the front

left and right channels of the 6-Channel Analog Audio Outputs, with no

information available at the other 6-Channel Analog Audio Output jacks.

Stereo mode is used when you wish to connect the 2-Channel Analog

Audio Outputs directly to a TV for viewing DVDs without turning on the

full CP system, or for multiroom operation.

In Multichannel mode, only the front left and right channel information is

available at the 2-Channel Analog Audio Outputs, and no center or sur-

round information is present. Each of the 6-Channel Analog Audio

Outputs delivers the information appropriate to its channel. Multichannel

mode is preferred when using the CP 65 on its own.

Macros: These buttons may be programmed to execute long

command sequences with a single button press. They are useful for

programming the command to turn on or off all of your components,

or for accessing specialized functions for a different component than the

one you are currently operating.

Dolby

Surround Mode Selector: The first press of this button

will select the last-used Dolby Surround mode, and each additional

press will cycle through the variants that are currently available. Not

all modes are available with all sources; see the AVR 347 manual for

more information.

DTS

Surround Mode Selector/A-B Repeat: The first press of

this button will select the last-used DTS Digital mode if DTS processing

is available, and each additional press will cycle through the 2.0, 5.1 and

DTS-ES

modes. See the AVR 347 manual for more information.

When the DVD player has been selected, this button serves the A-B

Repeat function. The first press while a disc is playing selects the begin-

ning of the passage you wish to repeat, and the second press selects

the end of the passage. The selected passage will play continuously until

the A-B Button is pressed a third time, or play is stopped.

DTS Neo:6

Surround Mode Selector: The first press of this

button will select the last-used DTS Neo:6 Surround mode if it is avail-

able, and each additional press will cycle through the variants that are

currently available. See the AVR 347 manual for more information.

REMOTE CONTROL FUNCTIONS

RCP7 OM.qxd 3/23/07 4:15 PM Page 7

Harman Kardon RCP 7 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info