Bedienungsanleitung Hendi 239346 (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741218

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Operation

• Select the front or rear hob that you want to use.

Place a suitable cooking equipment at the centre

of the heating surface. (front or rear hob)

(See --> Suitable cooking equipment).

Note: Do not place empty cookware as this may

damage the cookware.

• Then, connect the internal wires of the power

supply cord to a suitable electrical supply.

(See --> Power supply line connection).

• Switch on the electrical power supply system.

• “- - - -“ will be shown on the display (2) and (3)

and the appliance is in STANDBY mode.

• After that, you can start to operate by turning the

knob (1) or (4) in clockwise direction depend on

which of the hob that you use (Front or rear hob).

• Power that you select will be shown instantly on

the display (2) or (3).

• Now, the appliance starts cooking operation. The

set power will be shown on the display (2) or (3)

during operation accordingly.

• After cooking ﬁnished, you can turn the appliance

to STANDBY mode by turning the knob (1) or (4) to

“0” position and “- - - -“ is shown on the display

(2) or (3) respectively.

Note:

1). After an extended period of operation, it is nor-

mal for the cooling fan inside to continue run-

ning in STANDBY mode for some time. Before

unplug the appliance, wait until the cooling fan

stops running.

2). The appliance’s surface is still hot even after

switch to STANDBY mode. Please wait the ap-

pliance completely cool down before touching

or cleaning.

3). Max power setting is 5000W for front hob and

3500W for rear hob respectively. When set the

front hob to 5000W, the max power of the rear

hob will then change to 2000W.

4). If no cookware is placed on the heating surface

during operation, it will switch off automatically

within 1 minute and beep sound will be heard.

Error codes display

Error codes shown on

the display (2) or (3)

Possible cause Possible solution

E 1 The temperature of the appliance is too

high

Clear all obstacles that around the appliance. Dis-

connect the appliance, remove the pan or pot, wait

until the appliance is completely cool down.

Cooling fan defective Contact the supplier.

E 2 The pan or pot is overheated.

Possibly, the pan becomes empty and

appliance will shut down for protection.

Disconnect the appliance, remove the pan or pot,

wait until the appliance is completely cool down.

And make sure water is inside the pan.

E 3 The supply voltage is abnormal. (Supply

voltage is too high or too low)

Make sure that the appliance is connected to a

suitable electrical power supply.

Cleaning and Maintenance

Attention: Always disconnect the appliance from the electrical power source and let it cool down completely

before cleaning and storage.

Cleaning

• Never immerse the appliance in water or other

liquids.

•

Clean the cooled exterior surface with a slightly

damp cloth or sponge with some mild soap solution.

• Never use abrasive sponges or detergents, steel

wool or metallic utensils to clean the interior or

exterior parts of the appliance.

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

• Never put objects on the heating surface as it

may crack the surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239346 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info