Bedienungsanleitung Hendi 239346 (Seite 8 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741218

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Troubleshooting

If the appliance does not function properly, please

check the below table for the solution. If you are

still unable to solve the problem, please contact the

supplier/service provider.

• Error codes shown on the digital display (2) or (3).

(See --> Error codes display)

Problems Possible cause Possible solution

The appliance does not switch ON.

- Electrical power connection is not

connected properly with the electri-

cal outlet.

- On/Standby (1) button is not pressed.

- Check the electrical power connec-

tion to make sure it is connected

properly.

- Press the On/Standby (1) button to

start operation.

Cooling fan is operating even after

the appliance is switched to Standby

mode.

- This is normal. The cooling fan con-

tinues running in Standby mode for

some time to cool down all internal

elements.

- Wait until the cooling fan stops ro-

tating.

Technical specification

Item no.: 239346

Operating voltage and frequency:

380-400V~ 3N~ 50/60Hz

Rated input power: 7000W

Protection class: Class I

Waterproof protection class: IPX3

Dimension: 698 x 405 x (H) 145 mm

Net weight: approx. 18kg

Power setting: Front hob: Min. 800W, Max. 5000W

Rear hob: Min. 800W, Max. 3500W (Changed to 2000W when front hob is 5000W)

Remark: Technical specification is subjected to change without prior notification.

Warranty

Any defect affecting the functionality of the ap-

pliance which becomes apparent within one year

after purchase will be repaired by free repair or re-

placement provided the appliance has been used

and maintained in accordance with the instructions

and has not been abused or misused in any way.

Your statutory rights are not affected. If the appli-

ance is claimed under warranty, state where and

when it was purchased and include proof of pur-

chase (e.g. receipt).

In line with our policy of continuous product devel-

opment we reserve the right to change the product,

packaging and documentation speciﬁcations with-

out notice.

Discarding & Environment

When decommissioning the appliance, the prod-

uct must not be disposed of with other household

waste. Instead, it is your responsibility to dispose to

your waste equipment by handing it over to a des-

ignated collection point. Failure to follow this rule

may be penalized in accordance with applicable

regulations on waste disposal. The separate col-

lection and recycling of your waste equipment at

the time of disposal will help conserve natural re-

sources and ensure that it is recycled in a manner

that protects human health and the environment.

For more information about where you can drop off

your waste for recycling, please contact your local

waste collection company. The manufacturers and

importers do not take responsibility for recycling,

treatment and ecological disposal, either directly

or through a public system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 239346 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info