Bedienungsanleitung Hendi 226001 (Seite 6 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741700

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

4. INSTALLATION AND ADJUSTMENT

4.1 PRELIMINARY INFORMATION

• Keep the Instruction Manual and give it to the

next owner of the appliance.

• Check the appliance before installation for any

visible damage. Do not install or use any dam-

aged appliance.

• The appliance need to be installed with sufficient

ventilation to prevent the occurrence of unac-

ceptable concentrations of substances harmful

to health in the room in which they are installed.

• Leave about at least 20 cm between the ap-

pliance and the adjacent walls for ventilation

purposes.

4.2 WORKING PRINCIPLE OF THE APPLIANCE

The appliance is heated by natural gas or LPG. In

case ﬂ ame on heating elements is out due to any

reason, there is a safety valve switching off gas

automatically. The Doner kebab skewer is rotated

by a double-direction reversible AC motor. Doner

kebab meat is closed up by moving the upper and

lower-skewer locking mechanisms.

4.3 MOUNTING AND CONNECTION

• Make electrical connection of your appliance in

accordance with the circuit diagram on page 14.

• The appliance must be earthed in compliance

with the EN 60335-1 standard. Ensure mainte-

nance of the earthing on a regular basis.

• Electrical safety of the appliance may be ensured

only by means of a protected cable system in ac-

cordance with relevant regulations. It is very im-

portant to ensure this essential safety measure.

If in any doubt, have the installation checked by a

professional electrician. The manufacturer shall

not be liable for any damage that may arise from

a missing or broken fuse cable.

• When performing the electric connection of the

appliance, never use an extension cord. Appli-

ance safety cannot be ensured when an exten-

sion cord is used.

• Do not use your appliance in a multi-plug socket

outlet.

• Check the appliance before installation for any

visible damage. Do not install or use any dam-

aged appliance.

• Before connection of your appliance to the

mains, make sure that the data on the manufac-

turer’s name plate complies with the data of your

local main circuit (voltage, frequency, safety de-

vices). If in any doubt, please consult a qualiﬁ ed

electrician.

• In order to avoid hazards, if the main cord is dam-

aged, it must be replaced by the manufacturer,

technical service authorised by the manufacturer

or a similarly qualiﬁ ed professional.

• Before performing a gas connection of the appli-

ance, check if local gas distribution requirements

(type and pressure of the gas) and adjustment of

the appliance are appropriate.

• Ensure that the gas connection of the appliance

is done in accordance with valid standards.

• During installation, never squeeze the gas hose

under the frame.

• Keep the gas hose away from heated parts of the

product.

• Connect your appliance to the LPG tube or the

natural gas supply valve as close as possible. The

connection must be leak-proof.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 226001 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info