Bedienungsanleitung Hendi 281369 (Seite 9 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741720

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

1) Open the door and press number button ‘1’

for 5 seconds, display will show ‘PROGRAM’

for item 281369, 281413 or ProG for item

281444.

2) Press number button ‘3’, display shows P:03

for item no.: 281369, 281413 only. After 2

seconds the display will show the time relat-

ed with the program ‘:30’.

3) Press the number buttons ‘1’ ‘2’ ‘5’ to set the

cooking time.

4) Press

for the power level. The display will

show ‘1:25 70’ for item 281369, 281413 only.

5) Press the ‘ ’ button for item no. 281369,

281413 only. The program is now saved un-

der number keyboard ‘3’.

To overwrite the program repeat the steps

above.

Note: Total programming time is limited to 60

minutes only.

Note: When the cooking time exceeds the max-

imum time the microwave can operate (stand-

ard 60 minutes) three beeps will be sound. This

means you need to adjust the time before the

program can work.

Note: See also = = > Return to factory settings.

Double quantity (X2)

This microwave is equipped with a function

to calculate the amount of time needed when

preparing a double quantity of food. Press the

‘X2’ button followed by the program and the

microwave will increase the time you preset

and start the process. This function can only

be used in combination with a preset program

mode.

Multi stage cooking Mode

This function allows the user to cook the food

under different combination of power levels by

“Manual Entry mode or Programming mode.

The maximum number of stages is 3. To use

this function ﬁrst follow the steps under ‘Man-

ual entry’. After setting the time and power of

the ﬁrst stage press ‘ ’ again, the display

shows ‘STAGE-2’ for item no. 281369, 281413

or S-2 for 281444 only, now input the desired

time and power. If a third stage is needed,

press ‘time entry’ once more, the display will

show ‘STAGE-3’ for item no. 281369, 281413

or S-3 for 281444 only, and input the desired

time and power. Now press the ‘ ’ button to

start the microwave. Multi stage input is set in

a same manner while in programming mode.

Bellow an example of how this could work:

1) Open the door, then press and hold number

“1” on the number keyboard for 4 ~ 6 sec-

onds, display will show ‘PROGRAM’ for item

no. 281369, 281413 or ProG for item no.:

281444.

2) Press number button ‘3’, display shows P:03

for item no.: 281369, 281413 only. After 2

seconds the display will show the time relat-

ed with the program (standard ‘:30’).

3) Press the number buttons ‘1’ ‘2’ ‘5’ to set the

cooking time.

4) Press for the power level of stage 1.

The display will show ‘1:25 70’ for item no.:

281369, 281413 only.

5) To set the second stage press ‘time entry’

button, the display will show ‘STAGE-2’ for

item no. 281369, 281413 or S-2 for 281444

only.

6) Press the number buttons ‘3’ ‘3’ ‘0’ to input

the time.

7) Press

for the power of stage 2. The dis-

play will show ‘3:30 50’ for item no.: 281369,

281413 only.

8) Press the ‘start’ button. The multi stage pro-

gram is now saved under button ‘3’.

Note: Total cooking time is limited to 60 min-

utes only.

Note: When multi stage cooking is active the

microwave shows the total time remaining of

all stages.

Note: See also = = > Return to factory settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 281369 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info