Bedienungsanleitung Hendi 281369 (Seite 11 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

741720

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Cleaning and maintenance

• Always remove the plug from the socket be-

fore cleaning the microwave.

• Beware: Never immerse the microwave in

water or any other liquid!

• Clean the outside of the microwave with a

damp cloth and water with mild detergent.

And dry afterwards.

• Clean the inside and door with a damp cloth

and water with mild detergent to remove all

food and grease build up.

• Remove any spillage right after each use. Not

cleaning can result in burnt is stains and bad

smells.

• Keep the sealing gaskets on the door clean,

clean them regularly with a wet cloth and wa-

ter with a mild detergent.

• Never use aggressive cleaning agents or

abrasives. Do not use any sharp or pointed

objects. Do not use petrol or solvents! Clean

with a damp cloth and detergent if necessary.

Do not use abrasive materials.

• Clean the grease and air ﬁlter regularly, the

microwave might overheat when this isn’t

done properly or food will get contaminated

with grease.

Trouble shooting

The following events can be considered as nor-

mal effects of working with this microwave.

• Radio and TV reception may be interfered

when the microwave is operating.

• The light of the oven might be dimmed when

operating.

• During heating steam can come from the

food and can accumulate on the cooler parts

of the microwave like for instance on the

door.

Trouble Possible cause Solution

Microwave doesn’t

start working

Power cord not plugged in

correctly.

Check if the power cord is plugged in correctly.

Fuse blown of circuit

breaker active.

Replace fuse or reset circuit breaker. If not sure how

to do this contact your supplier.

Power outlet defective Test outlet with other appliance and check circuit

breaker.

Oven doesn’t heat Door not closed correctly Check the door if it closes properly, if it can’t be

closed properly contact your supplier.

The display shows

‘E-01’ or ‘E-02’

Temperature sensor

broken

Unplug the microwave from the power outlet and wait

10 seconds before plugging the power cord back in.

If the problems isn’t solved after this contact your

supplier.

The display shows

‘OVEN IS HOT DO NOT

OPEN THE DOOR’ for

item no.: 281369 only.

Warning is activated by the

high temperature in the

chamber.

Wait 3 minutes, the microwave will cool down. Check

is the vents are clear. Never use the microwave

without food in it, don’t overheat food. If the problem

isn’t solved after these steps contact your supplier.

Light and fan make

noise when the

microwave ﬁnished

operating.

High temperatures. This is normal, the lamp and fan stop when the

microwave has cooled down enough. If they don’t stop

working unplug the microwave from the power socket

and wait 10 seconds before plugging back in. If this

doesn’t solve the problem contact your supplier.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hendi 281369 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info