647373
19
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL
Version 06.03 DIG.EN 19
AUTOMATIC PROGRAMMING
A. Select the correct programme with the PROG 0-9 Key for setting function values. The
programme number is displayed on the small display.
B. Then press the REPROG key
to switch into programme mode.
The programme number now starts to blink on the small display.
C. VACUUM FUNCTION
Digital Time Control
Time is increasing. As soon as the vacuum meter gets to –1 press the STOP
VACUUM Key. The machine cycle automatically switches to the following
function.
Remark Digital Time Control
Let the vacuum function run 2 to 4 seconds longer after reaching –1 on the
vacuum meter so that “trapped air” in the packaging is also extracted.
Digital Sensor Control
The percentage vacuum increases. As soon as the value 99% is reached press
the STOP VACUUM Key. The machine cycle automatically switches to the
following function.
Remark
If full vacuum is not required press the STOP VACUUM Key when the required
value has been reached.
D. VACUUM PLUS FUNCTION (only with digital sensor control)
Digital Sensor Control
Time is increasing. Press the STOP VACUUM Key at the required time.
The machine cycle automatically switches to the following function.
Remarks
The VACUUM PLUS function can only be de-activated (OFF) by manual
programming. The VACUUM PLUS function will only run when VACUUM
function has been set at 99%.
E. GAS FLUSH FUNCTION (optional)
Digital Time Operation
Time is increasing. As soon as the vacuum meter gets to the required under-
pressure, press the STOP VACUUM Key. The machine cycle automatically
switches to the following function.
Digital Sensor Control
The percentage vacuum decreases. As soon as the required value is reached
press the STOP VACUUM Key. The machine cycle automatically switches to
the following function.
Remarks
The minimal under-pressure advised is 0.5 bar or 50% vacuum. The minimum
under pressure that can be set is 0.3 bar or 30%. GAS FLUSH function can
only be de-activated (OFF) by manual programming.
Starting situation: machine is in normal operating mode and the lid is open
Close the lid. The machine c
y
cle starts automaticall
y
.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Henkelman MARLIN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Henkelman MARLIN

Henkelman MARLIN Bedienungsanleitung - Deutsch - 44 seiten

Henkelman MARLIN Bedienungsanleitung - Holländisch - 43 seiten

Henkelman MARLIN Bedienungsanleitung - Französisch - 46 seiten

Henkelman MARLIN Bedienungsanleitung - Spanisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info