Bedienungsanleitung Henkelman POLAR (Seite 21 von 43) (Englisch)

647375

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

BOXER / MARLIN / FALCON / POLAR SERIES USER MANUAL

Version 06.03 DIG.EN 21

MACHINE MAINTENANCE

GENERAL

Regular, thorough maintenance is essential for extending the machine's life, for preventing malfunctions and for

achieving an optimal packaging result. If the machine is used intensively (more than 4 hours per day) then a professional

service is recommended every 6 months. In other cases one complete service per year is sufficient (depending on

location, environment, and products).

There are however also small maintenance activities that must be carried out more regularly and that the user can do

himself. The following page contains a breakdown of these activities.

IMPORTANT BEFORE AND DURING MAINTENANCE

 The machine must always be completely voltage free before any maintenance is carried out on it. Remove the plug

from the wall socket or put the master switch in the O position.

 If the machine is not functioning properly or if it produces strange noises, turn it off immediately with the ON/OFF

switch and contact the supplier or Henkelman BV.

 If the machine is equipped with a gas flush system then always close the main cock during standard maintenance

activities. Always take care that the pressure on the pressure reducing valve on the gas bottle is never higher than 1

atmosphere/ATO before, during and after the maintenance activities. A higher pressure may cause irreparable

damage to the machine. NEVER use flammable gasses or gas mixtures containing oxygen.

 When cleaning transparent lids (if applicable), NEVER use cleaning agents containing solvents. Check at least once

a week if there are cracks in the lid. In case of cracks, turn off the machine immediately and contact the supplier or

Henkelman BV.

 High pressure cleaning is not permitted for cleaning the machine. High pressure cleaning can cause considerable

damage to electronic and other parts of the machine.

 Water may never be permitted to enter either the extraction nozzle of the chamber or the blow-off opening of the

pump. This would cause irreparable damage to the pump.

 Larger services must always be carried out by an authorised supplier.

 The BOXER and MARLIN 42 and 42 XL machines are designed for a maximum of 5 hours operation per day. Other

machines are designed for a maximum of 8 hours per day. The supplier or Henkelman BV cannot be held

responsible for any malfunctions or defects if these operation time limits are clearly exceeded without consultation.

 The machine must be moved or transported in an upright position. The machine may NOT be tilted as it can cause

damage to the pump.

 The supplier or Henkelman BV cannot be held responsible for any malfunctions or defects if the maintenance

instructions in this manual are not followed.

 Contact the supplier or Henkelman BV if there are any doubts or questions about maintenance or malfunctions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Henkelman POLAR Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Henkelman POLAR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info