Bedienungsanleitung Hercules Brose 14d Pedelec Display 2020 (Seite 50 von 94) (Englisch)

761552

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

MY20H01-12_1.0_28.05.2019 50

Operation

6.3.6.1 Adjusting the negative deflection

Negative deflection (sag) is compression of the

fork caused by the weight of the rider and their

gear (e.g. a backpack), the sitting position and the

frame geometry. This sag is not caused by riding.

Each rider has a different weight and sitting

position. The sag depends on the rider's position

and weight and should be between 15% and 20%

of the maximum fork deflection, depending on

pedelec usage and preferences.

When adjusting the sag, ensure that each

compression adjuster is in the open position, i.e.

turned clockwise until it stops.

The pressure is to be measured at an ambient

temperature of 21 to 24 °C.

The air valve is located under a blue cover on

the head of the left shock absorber. Screw off

the cover anti-clockwise.

Place a high-pressure pump on the valve.

Pump the suspension fork up to the desired

pressure. Never exceed the recommended

maximum air pressure. Comply with the values

of the filling pressure table.

Remove the high-pressure pump.

Measure the distance between the crown and

the dust wiper of the fork. This distance is the

"total deflection of the fork."

Push the O-ring downward against the dust

wiper of the fork. If an O-ring is not available,

attach a cable tie to the stanchion temporarily.

Put on your usual bicycling clothing, including

baggage.

Sit on the pedelec in your usual riding position

and support yourself (e.g. against a wall or

tree).

Get off the pedelec without allowing it to

deflect.

Measure the distance between the dust wiper

and the O-ring or cable tie. This dimension is

the sag. The recommended sag value is

between 15% (hard) and 20% (soft) of the

"total fork deflection."

Increase or reduce the air pressure until you

have reached the desired sag.

Once the sag is correct, re-tighten the blue air

cover cap clockwise.

6.3.6.2 Adjusting the rebound

The rebound defines the speed at which the fork

rebounds after being loaded. The rebound setting

depends on the air pressure setting. Higher sag

settings require lower rebound settings.

Turn the rebound adjuster clockwise to the

closed position until it stops.

Figure 54: FOX rebound adjuster (1) on the fork

Turn the rebound adjuster anti-clockwise.

Adjust the rebound in such a way that the fork

rebounds quickly, but without bottoming out

Rider weight Rhythm 34 Rhythm 36

Minimum air

pressure

40 psi (2.8 bar) 40 psi (2.8 bar)

54 - 59 kg 58 psi 55 psi

59 - 64 kg 63 psi 59 psi

64 - 68 kg 68 psi 63 psi

68 - 73 kg 72 psi 67 psi

73 - 77 kg 77 psi 72 psi

77 - 82 kg 82 psi 76 psi

82 - 86 kg 86 psi 80 psi

86 - 91 kg 91 psi 85 psi

91 - 95 kg 96 psi 89 psi

95 - 100 kg 100 psi 93 psi

100 - 104 kg 105 psi 97 psi

104 - 109 kg 110 psi 102 psi

109 - 113 kg 114 psi 106 psi

Max. pressure 120 psi (8.3 bar) 120 psi (8.3 bar)

Table 32: Filling pressure table of the FOX air fork

If you cannot achieve the desired sag, you may

need to make an internal adjustment. For this

purpose, contact your specialist dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hercules Brose 14d Pedelec Display 2020 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hercules Brose 14d Pedelec Display 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info