Bedienungsanleitung Hikoki C1805DA (Seite 17 von 272) (Alle Sprachen)

816213

Zoom out

Zoom in

Vorherige Seite

1/272

Nächste Seite

English

Table 3

LED Light Display Safeguard Function

On 0.1second/off

0.1second Overload Protection

Remove the cause of the

overloading.

On 0.5 second/

Off 0.5second Temperature protection

Allow the tool and battery to

thoroughly cool.

MAINTENANCE AND INSPECTION

WARNING

Be sure to turn off the switch and remove the battery

before maintenance and inspection.

1. Inspecting the saw blade

Since use of as dull saw blade will degrade efficiency

and cause possible motor malfunction, sharpen or

replace the saw blade as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

3. Motor unit maintenance

The motor winding is an important part of this tool.

Avoid damaging and be careful to avoid contact with

cleaning oil or water.

After 50 hours of use, clean the motor by blowing into

the ventilation holes of the motor housing with dry air

from an air gun or other tool (Fig.29).

Dust or particle accumulation in the motor can result in

damage.

4. Inspecting and maintaining the lower guard

Always make sure that the lower guard moves

smoothly.

In the event of any malfunction, immediately repair the

lower guard.

For cleaning and maintenance, use an air gun or other

tool to blow clean the space between the lower guard

and gear cover as well as the rotation part of the lower

guard with dry air (Fig.29).

Doing so is effective for the emission of chips or other

particles.

Accumulation of chips or other particles around the

lower guard may result in malfunction or damage.

WARNING

To prevent dust inhalation or eye irritation, wear

protective safety goggles and a dust mask when using

an air gun or other tool to clean the lower guard,

ventilation holes or other parts of the product.

Ensure smooth movement of

lower guard

Space between lower

guard and gear cover

Air gun

Rotation part of the

lower guard

Housing vent

Fig.29

5. Cleaning the inside of the saw cover

Regularly check and clean to make sure that sawdust

and other residue do not collect inside of the saw cover.

Always remove the saw blade when checking and

cleaning. (Fig.30)

Washer (A)

Spindle

Saw cover

Fig. 30

6. Inspection of terminals (tool and battery)

Check to make sure that swarf and dust have not

collected on the terminals.

On occasion check prior, during and after operation.

CAUTION

Remove any swarf or dust which may have collected on

the terminals.

Failure to do so may result in malfunction.

7. Cleaning on the outside

When the power tool is stained, wipe with a soft dry

cloth or a cloth moistened with soapy water. Do not use

chloric solvents, gasoline or paint thinner, for they melt

plastics.

8. Storage

Store the power tool and battery in a place in which the

temperature is less than 40°C and out of reach of

children.

NOTE

Storing lithium-ion batteries.

Make sure the lithium-ion batteries have been fully

charged before storing them.

Prolonged storage (3 months or more) of batteries with

a low charge may result in performance deterioration,

significantly reducing battery usage time or rendering

the batteries incapable of holding a charge.

However, significantly reduced battery usage time may

be recovered by repeatedly charging and using the

batteries two to five times.

2023/08/01 12:32:25Stylesheet: EU Version: 2023.7.24

C1805DA_C99750471_308_EU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki C1805DA Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info