Bedienungsanleitung Hikoki RP350YBL (Seite 7 von 188) (Alle Sprachen)

816295

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

English

- Use of devices, such as: routers, planers, small

grinding devices, etc.

When using a fleece filter bag (5) the filter cleaning

is non-functional.

Switch off the device, remove the mains plug and

open the snap locks (8). Remove the upper part (7)

of the device from the container (9).

Turn the red rotary switch (on

the inside of the suction

opening) until the stop: the text

"CLOSE" shows upwards to

the marking ▲.

Hold the fleece filter bag (5) on the flange and, with

its opening, guide it first over the latch at the bottom

part of the suction opening, then fit up to the stop on

the suction opening. Replace the upper part of the

device on the container, close the snap locks.

8.2 Inserting a PE Disposal Bag (sold sepa-

rately)

We recommend the use of PE-disposal bags for:

- Applications, where larger amounts of dust are

created (e.g. removal of plaster surfaces, spot-

grinding and grinding of screeds, etc.).

- Use of devices, such as e.g.: renovation milling

devices, renovation grinders, drywall grinders,

wall grinders etc.

When using a PE disposal bag, the filter cleaning

must be switched on (function AR / IR) for

corresponding materials (see recommendation).

Switch off the device, remove the mains plug and

open the snap locks (8). Remove the upper part (7)

of the device from the container (9).

Turn the red rotary switch (on

the inside o the suction

opening) to the stop: the text

"OPEN" shows upwards to the

marking ▲.

Hold the PE disposal bag on the flange and, with its

opening, guide it first over the latch at the bottom

part of the suction opening, then fit up to the stop on

the suction opening.

Spread out the PE disposal bag evenly across the

container floor. Arrange the edges of the PE

disposal bag around the container rim so that the

bag is firmly clamped on all sides by the upper part

(7), once replaced.

9.1 Switching On/Off, Automatic, ACP

Select the required operating mode using the

switch (2):

Position "0":

• Dust extractor is switched off

Position "I":

• Dust extractor is switched on

• ACP* is switched off

Position "IR":

• Dust extractor is switched on

• ACP* is switched on

Position "AR":

• Automatic On/Off switch: The dust

extractor is switched on or off by means

of a power tool connected to the plug

socket (4). (Note: The dust extractor continues to

run for approx. 10 seconds after the power tool is

switched off. This is to ensure that dust does not

remain in the hose.)

• ACP* is switched on

* ACP (Automatic Vibrate Function): automatic filter

cleaning when you switch on the device and

when a specific negative pressure value is

reached. For filters that remain clear, with no

need to interrupt work.

9.2 Plug socket (4)

The plug socket (4) is designed for connection

to a power tool only.

The total maximum permissible current

consumption (of dust extractor and connected

unit) must not exceed 16 A.

CAUTION! Ensure that the power tool is

switched off when plugging it in. Regardless of

the switch position, the plug socket is always live

when the mains plug is plugged in.

If the switch (2) is in the "0" position, you can use the

plug socket as an extension lead (e.g. for a light

fitting).

If the switch (2) is in the "AR" position, the dust

extractor is switched on or off by means of a power

tool connected to the plug socket (4).

9.3 Suction power regulator

Using the suction power regulator (1), you can

adjust the motor speed and thus the suction power

continuously to the working conditions.

9.4 Volume flow control display

The volume flow control display (3) flashes when

the container is full and/or if the suction hose is

blocked.

9. The device

FFO

RP350YBL_C99749971_305.book 7 ページ２０２３年４月６日　木曜日　午後１時６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hikoki RP350YBL Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info