Bedienungsanleitung Hitachi CH10 (Seite 10 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

563830

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

English

ⅷ Preparation

a) Before use, check the supply and extension cord for

signs of damage or aging. If the cord becomes

damaged during use, disconnect the cord from the

supply immediately. DO NOT TOUCH THE CORD

BEFORE DISCONNECTING THE SUPPLY. Do not use

the appliance If the cord is damaged or worn.

b) Never operate the machine while people, especially

children, or pets are nearby.

c) Wear eye protection and stout shoes at all times

while operating the machine.

ⅷ Operation

a) Keep supply and extension cords away from cutting

means.

b) Use the machine only in daylight or good artificial light.

c) Never operate the machine with damaged guards or

shields or without guards or shields in place.

d) Switch on the motor only when the hands and feet

are away from the cutting means.

e) Always disconnect the machine from the power

supply (i.e. remove the plug from the mains or remove

the disabling device)

– whenever leaving the machine unattended;

– before clearing a blockage;

– before checking, cleaning or working on the

machine;

– after striking a foreign object;

– whenever the machine starts vibrating abnormally.

f) Take care against injury to feet and hands from the

cutting means.

g) Always ensure that the ventilation openings are kept

clear of debris.

ⅷ Maintenance and storage

a) Disconnect the machine from the power supply (i.e.

remove the plug from the mains or remove the

disabling device) before carrying out maintenance or

cleaning work.

b) Use only the manufacturer’s recommended

replacement parts and accessories.

c) Inspect and maintain the machine regularly. Have

the machine repaired only by an authorized repairer.

d) When not in use, store the machine out of the reach

of children.

ⅷ Recommendation

a) The appliance should be supplied via a residual

current device (RCD) with a tripping current of not

more than 30 mA.

PRECAUTIONS FOR SHRUB SHEAR AND

GRASS SHEAR

1. Before starting work make sure there are no power

cables in the work area. The blade could come into

contact with the power cable causing electric shock,

ground faults and other accidents.

2. Hold the tool firmly with both hands during use to

prevent injury.

3. Keep your hands and all parts of the body away from

the blade to prevent contact that could lead to injury.

4. Make sure the blade and all accessories are properly

installed. Improper installation could cause the blade

or accessories to come loose resulting in an injury.

5. Make sure the blade is not cracked, deformed or

excessively worn before starting work. Do not use a

blade in this condition as it could break and cause

injury.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type of battery

pack may create a risk of fire when used with

another battery pack.

b) Use power tools only with specifically designated

battery packs.

Use of any other battery packs may create a risk

of injury and fire.

c) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause

irritation or burns.

6) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool

is maintained.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach of

children and infirm persons.

SHRUB SHEAR SAFETY WARNINGS

⅜ Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure the

switch is off when clearing jammed material. A

moment of inattention while operating the shrub

shear may result in serious personal injury.

⅜ Carry the shrub shear by the handle with the cutter

blade stopped. When transporting or storing the

shrub shear always fit the cutting device cover.

Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

⅜ Keep cable away from cutting area. During operation

the cable may be hidden in shrubs and can be

accidentally cut by the blade.

GRASS SHEAR SAFETY WARNINGS

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operation practices

ⅷ Training

a) Read the instructions carefully. Be familiar with the

controls and the proper use of the machine.

b) Never allow people unfamiliar with these instructions

or children to use the machine. Local regulations can

restrict the age of the operator.

c) Keep in mind that the operator or user is responsible

for accidents or hazards occurring to other people or

their property.

01Eng_CH10DL_WE 9/30/09, 16:029

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CH10 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info