Bedienungsanleitung Hitachi CH10 (Seite 11 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

563830

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

English

6. Do not use the tool to cut wire, metal plates or

other hard objects. The tool could be damaged and

cause injury.

7. If the tool does not work normally and is producing

strange noise, turn it off immediately and have it

inspected and repaired.

8. If the tool falls or strikes against an object, check

the blade and the body for damage, cracking and

deformation. Use of a damaged, deformed or

cracked blade could result in injury.

9. Do not disassemble the blade. This may result in injury.

10. This product generates vibration during operation.

This makes long continuous work physically

strenuous so avoid a poor work posture and be sure

to take frequent rests. Also during short work periods,

stop work immediately to take a rest when your

fingers, hands, arms or shoulders become tired.

11. Use gloves, or cloth to protect your hands when

handling the blade. Careless handling may lead to

injury.

12. Do not expose the blade to excessive pressure

during cutting as the blade could be damaged.

13. The blade is extremely hot after cutting. Do not

touch it to prevent burn injuries.

14. When working in high places, make sure that no

one is standing below. They could be injured should

you accidentally drop the tool or other object.

15. To prevent unforeseen accidents, never leave the

tool running unattended on a stand or on the floor.

16. Do not expose the tool to insecticide and other

chemicals. Such chemicals could cause cracking

and other damage.

PRECAUTIONS FOR BATTERY AND CHARGER

1. Always charge the battery at a temperature of 0 –

40°C. Charging the battery at temperatures outside

the range of 0 – 40°C may prevent proper charging

and reduce battery life.

The most suitable temperature for charging is that

of 20 – 25°C.

2. When one charging is completed, leave the charger for

about 15 minutes before the next charging of battery.

Do not charge the battery more than 2 hours.

3. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

4. Never disassemble the rechargeable battery and

charger.

5. Never short-circuit the rechargeable battery. Short-

circuiting the battery will cause a great electric

current and overheat. It results in burn or damage

to the battery.

6. Do not dispose of the battery in fire. If the battery is

burnt, it may explode.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips

with the protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor

may stop. This is not the trouble but the result of

protection function.

1. When the battery power remaining runs out, the

motor stops.

In such case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes

of overloading. After that, you can use it again.

3. If the battery is overheated under overload work,

the battery power may stop.

In this case, stop using the battery and let the

battery cool. After that, you can use it again.

Furthermore, please heed the following warning and

caution.

WARNING

In order to prevent any battery leakage, heat generation,

smoke emission, explosion and ignition beforehand,

please be sure to heed the following precautions.

1. Make sure that swarf and dust do not collect on the

battery.

⅜ During work make sure that swarf and dust do not

fall on the battery.

⅜ Make sure that any swarf and dust falling on the

power tool during work do not collect on the battery.

⅜ Do not store an unused battery in a location exposed

to swarf and dust.

⅜ Before storing a battery, remove any swarf and

dust that may adhere to it and do not store it together

with metal parts (screws, nails, etc.).

2. Do not pierce battery with a sharp object such as a

nail, strike with a hammer, step on, throw or subject

the battery to severe physical shock.

3. Do not use an apparently damaged or deformed

battery.

4. Do not use the battery in reverse polarity.

5. Do not connect directly to an electrical outlets or

car cigarette lighter sockets.

6. Do not use the battery for a purpose other than

those specified.

7. If the battery charging fails to complete even when

a specified recharging time has elapsed,

immediately stop further recharging.

8. Do not put or subject the battery to high

temperatures or high pressure such as into a

microwave oven, dryer, or high pressure container.

9. Keep away from fire immediately when leakage or

foul odor are detected.

10. Do not use in a location where strong static

electricity generates.

11. If there is battery leakage, foul odor, heat generated,

discolored or deformed, or in any way appears

abnormal during use, recharging or storage,

immediately remove it from the equipment or

battery charger, and stop use.

CAUTION

1. If liquid leaking from the battery gets into your

eyes, do not rub your eyes and wash them well

with fresh clean water such as tap water and contact

a doctor immediately.

If left untreated, the liquid may cause eye-problems.

2. If liquid leaks onto your skin or clothes, wash well

with clean water such as tap water immediately.

There is a possibility that this can cause skin irritation.

3. If you find rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when using

the battery for the first time, do not use and return it

to your supplier or vendor.

01Eng_CH10DL_WE 9/30/09, 16:0210

Hitachi CH10 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info