Bedienungsanleitung Hitachi CH18DL (Seite 15 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

563836

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

English

Continuous operating time

Approx. 35 minutes (depending on the work conditions)

MAINTENANCE AND INSPECTION

WARNING

⅜ Be sure to turn the tool off and remove the battery

from the tool before making inspections or carrying

out maintenance.

⅜ Do not disassemble to blade. Failure to heed this

warning may result in injury.

⅜ Use gloves, or cloth to protect your hands when

handling the blade. Failure to heed this warning may

result in injury.

1. Sharpening the blade (Fig. 15)

Move an iron file in the direction of the arrow for a

rough sharpening then use an oil stone to give the

blade a good finish.

(1) Use a fine iron file or one of intermediate coarseness.

(2) Coat the oil stone with machine oil (bicycle oil or the

like).

(3) Use a whetstone to gently remove any burrs from

the back of the blade edge.

When to sharpen the blade

While this will vary the type of trees that are trimmed

and how often it is used, it is a good idea to sharpen

the blade about once a year to maintain a sharp

edge.

NOTE

Do not use water for cleaning the blade to prevent

rust or other damage.

2. Lubricating the blade

During trimming, sap adhering to the blade edge will

increase load and wear down the battery more rapidly.

Use machine oil (or bicycle oil or the like) to lubricate

the blade and wipe the blade with a cloth. To prevent

the blade from rusting, be sure to lubricate the blade

after use and when it will not be used for an extended

period of time before placing it in the blade case.

3. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

4. Maintenance of the motor

The motor unit winding is the very “heart” of the

power tool.

Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

5. Cleaning on the outside

When the hedge trimmer is stained, wipe with a soft

dry cloth or a cloth moistened with soapy water. Do

not use chloric solvents, gasoline or paint thinner, for

they melt plastics.

6. Storage

Store the hedge trimmer in a place in which the

temperature is less than 40°C and out of reach of

children.

NOTE

Make sure that the battery is fully charged when

stored for a long period (3 months or more). The

battery with smaller capacity may not be able to be

charged when used, if stored for a long period.

7. Service parts list

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed in

each country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without

prior notice.

01Eng_CH14DSL_WE 10/27/10, 15:1214

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CH18DL Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info