Bedienungsanleitung Hitachi CH18DL (Seite 17 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

563836

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

English

Tool The tool does not trim well. The blade stopped because it was

used to cut a branch whose width

exceeded the blade’s cutting

capacity.

NOTE

Work that will repeatedly cause

the blade to stop will eventually

damage the motor.

Some garden trees have wood that

is very hard and may be beyond

the capacity of the tool even if it is

of a width that is within normal

capacity. Use a pair of pruning

shear to remove thick branches

before starting work.

An oblique cut may also exceed

the capacity of the tool since the

length of the cut increases. Be sure

to trim thick branches at right

angles.

Symptom Possible cause Remedy

Important notice on the batteries for the Hitachi

cordless power tools

Please always use one of our designated genuine

batteries. We cannot guarantee the safety and

performance of our cordless power tool when

used with batteries other than these designated

by us, or when the battery is disassembled and

modified (such as disassembly and replacement

of cells or other internal parts).

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country specific regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling

instruction, to a Hitachi Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

Information concerning airborne noise and vibration

The measured values were determined according to

EN60745 and declared in accordance with ISO 4871.

Measured A-weighted sound power level:

79 dB (A) (CH14DSL/CH14DL)

80 dB (A) (CH18DSL/CH18DL)

Measured A-weighted sound pressure level:

68 dB (A) (CH14DSL/CH14DL)

69 dB (A) (CH18DSL/CH18DL)

Uncertainty KpA: 3 dB (A).

Wear ear protection.

Vibration total values (triax vector sum) determined

according to EN60745.

No load:

= 2.3 m/s

, Uncertainty K = 1.5 m/s

(CH14DSL/CH14DL)

= 2.2 m/s

, Uncertainty K = 1.5 m/s

(CH18DSL/CH18DL)

The declared vibration total value has been measured in

accordance with a standard test method and may be

used for comparing one tool with another.

It may also be used in a preliminary assessment of

exposure.

WARNING

⅜ The vibration emission during actual use of the power

tool can differ from the declared total value depending

on the ways in which the tool is used.

⅜ Identify safety measures to protect the operator that

are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition to

the trigger time).

01Eng_CH14DSL_WE 10/27/10, 15:1216

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CH18DL Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info