Bedienungsanleitung Hitachi CM-N8100 (Seite 6 von 30) (Englisch)

654258

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

-7- -8-

Examples of use

Step 3

MOISTURIZE

If you do not have much time in the morning or you need to go out suddenly,

you can just use

MOISTURIZE

. This will moisturize your skin in 5 minutes.

Press the mode selector button to set

MOISTURIZE

●

Quick treatment (required time: 5 minutes)

Step 1

CLEANSING

Step 3

MOISTURIZE

Before you go out or when you have more time,

MOISTURIZE

after

CLEANSING

This will moisturize your cleansed skin.

After the end of

CLEANSING

, press the mode selector button to set

MOISTURIZE

●

Easy treatment (required time: 10 minutes)

Step 1

CLEANSING

Step 2

MICRO-PAT

Step 3

MOISTURIZE

This treatment is a daily standard.

After

CLEANSING

, loosen up your skin by

MICRO-PAT

to allow

MOISTURIZE

ingredients to easily permeate your skin, and give moisturizing care by make

moisturizing ingredients permeate your skin.

●

Daily treatment (required time: 15 minutes)

Step 1

CLEANSING

Step 2

MICRO-PAT

Step 3

MOISTURIZE

Step 4

REFRESH

Care for your skin once every one or two weeks by using all modes.

Fine vibrations and gentle electrode switching in

REFRESH

mode will condition

your skin.

●

Weekly treatment (required time: 20 minutes)

Press the mode selector button to set the mode of a desired treatment.

2. Press the power switch. (Fig. 6)

3. Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button.

●

The "LEVEL" indicator lamp will light, and the

CLEANSING

mode indicator lamp

will flash. If another mode indicator lamp flashes, press the mode selector button to

select

CLEANSING

Every time the "LEVEL" selector button is pressed, the potential power level is

switched between "HIGH" and "LOW". The vibration power does not change.

Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button

according to your skin condition.

●

The previous potential power level ("HIGH" or "LOW") is stored by the memory function.

Use at the "LOW" level is recommended for people who use this device for the first

time and who feel something unusual.

Make sure to hold the body with your hand touching either of the right and left side

plates.

●

5. Apply the cotton puff to your skin and move the device slowly. (Fig. 8)

●

Apply head onto skin and slowly head from center to the outside of your face.

Use this device within 5 minutes.

After 5 minutes have elapsed, the device will stop automatically.

The mode indicator lamp will light, and the device will start to vibrate.

The device will not vibrate unless you apply the cotton puff to your skin while

touching the side plate. (Skin sensing function)

If the head is not vibrating, the device is not working.

Power will be automatically turned off if device is unused for 30 seconds.

(Auto-off function)

4. Hold the main body by the side plate. (Fig. 7)

●

If the moisture in the cotton puff becomes insufficient or if it is hard to slide, add more

toner.

●

Do not use this device on the same part of your skin for more than 10 seconds.

If you feel slight current stimulation (a tingling sensation) during use, press the

"LEVEL" selector button to set the "LOW" level.

If you still feel a "tingling sensation," add more toner.

How to use

If you sense anything wrong with your skin or body during use,

immediately stop using this device and consult a dermatologist.

(Cause of an accident or poor health condition)

Do not use this product around eyes and ears.

(Cause of an accident or poor physical condition)

CAUTION

Do not keep the cotton puff on the same part of your skin, but

move it around. (Cause of skin trouble or poor health condition)

Step 1

CLEANSING

This mode is to remove fine dirt remaining in pores which cannot be removed by simple

washing and make your skin suitable for

MICRO-PAT

1. After washing your face, saturate the cotton puff attached to the head with toner.

Use your regular toner or wiping lotion with an exfoliating effect.

(Do not use a milky lotion or gel.)

Saturate the cotton puff with the toner until it seeps through the cotton puff to the

rear side.

●

Some toners (made only of mineral spring water or water, etc.) may not show

effects sufficiently.

7. Remove the ring and the cotton puff.

6. An automatic stop is made when 5 minutes have elapsed. (Auto-off function)

You will know the automatic stop with the ending sound.

●

Wipe off the surface of the head with tissue, etc.

●

Do not use the cotton puff again once it is used because its reuse will cause

skin trouble.

●

1. Evenly spread your regular

toner

over your face.

Step 2 "

MICRO-PAT

This mode is to effectively stimulate and loosen up your skin to allow moisturizing

ingredients to easily permeate your skin.

Wipe the

toner

off your hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi CM-N8100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info