Bedienungsanleitung Hitachi CM-N8100 (Seite 7 von 30) (Englisch)

654258

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

-9- -10-

●

The

"LEVEL"

indicator lamp will light, and the "

MICRO-PAT

" mode indicator lamp will

flash. If another mode indicator lamp flashes, press the mode selector button to

switch the mode.

If the power switch is pressed after the end of the "

CLEANSING

" mode, the

MICRO-PAT

" mode is set automatically.

7. Wipe the

toner

off the head and main body with tissue, etc.

●

The device will not vibrate unless you apply the head to your skin while touching

the side plate. (Skin sensing function)

If the head is not vibrating, the device is not working.

Power will be automatically turned off if device is unused for 30 seconds.

(Auto-off function)

●

Step 3 "

MOISTURIZE

3. Press the power switch. (Fig. 11)

This mode is to give moisturizing care by making the moisturizing ingredients of the

toner

permeate your skin.

1. Attach a new cotton puff to the main body, and fix it with the ring.

The

"LEVEL"

indicator lamp will light, and the "

MOISTURIZE

mode indicator lamp

will flash. If another mode indicator lamp flashes, press the mode selector button

to switch the mode.

●

Do not use a milky lotion or gel. Saturate the cotton puff with the

toner

until it

seeps through the cotton puff to the rear side.

●

For attaching a cotton puff, see "Preparation for use."

2. Saturate the cotton puff with your regular

toner

If the power switch is pressed after the end of the "

MICRO-PAT

" mode, the

MOISTURIZE

mode is set automatically.

2. Press the power switch. (Fig. 9)

3. Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button.

●

Every time the "LEVEL" selector button is pressed, the potential power level is

switched between "HIGH" and "LOW"

The vibration power does not change.

Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button

according to your skin condition.

●

The previous potential power level ("HIGH" or "LOW") is stored by the memory function.

Use at the "LOW" level is recommended for people who use this device for the first

time and who feel something unusual.

Make sure to hold the body with your hand touching either of the right and left side

plates.

●

4. Hold the main body by the side plate. (Fig. 10)

5. Apply the head directly to your skin and move it slowly.

●

Use this device within 5 minutes.

After 5 minutes have elapsed, the device will stop automatically.

The mode indicator lamp will light, and the device will start to vibrate.

CAUTION

Apply head onto skin and slowly head from center to the outside of your face.

Do not keep the head on the same part of your skin, but move it

around. (Cause of skin trouble or poor health condition)

Do not use this device on the same part of your skin for more than 10 seconds.

If you feel slight current stimulation (a tingling sensation) during use, press the

"LEVEL" selector button to set the "LOW" level.

6. An automatic stop is made when 5 minutes have elapsed. (Auto-off function)

You will know the automatic stop with the ending sound.

●

Make sure to hold the body with your hand touching either of the right and left side

plates.

●

6. Apply the cotton puff to your skin and move the device slowly. (Fig. 8)

●

Apply head onto skin and slowly head from center to the outside of your face.

Use this device within 5 minutes.

After 5 minutes have elapsed, the device will stop automatically.

The mode indicator lamp will light, and the device will start to vibrate.

The device will not vibrate unless you apply the cotton puff to your skin while

touching the side plate. (Skin sensing function)

If the head is not vibrating, the device is not working.

Power will be automatically turned off if device is unused for 30 seconds.

(Auto-off function)

5. Hold the main body by the side plate. (Fig. 7)

●

If the moisture in the cotton puff becomes insufficient or if it is hard to slide, add more

toner.

●

Do not use this device on the same part of your skin for more than 10 seconds.

CAUTION

Do not keep the cotton puff on the same part of your skin, but

move it around. (Cause of skin trouble or poor health condition)

●

If you feel slight current stimulation (a tingling sensation) during use, press the

"LEVEL" selector button to set the "LOW" level.

If you still feel a "tingling sensation," add more toner.

8. Remove the ring and the cotton puff.

7. An automatic stop is made when 5 minutes have elapsed. (Auto-off function)

You will know the automatic stop with the ending sound.

●

Wipe off the surface of the head with tissue, etc.

●

Do not use the cotton puff again once it is used because its reuse will cause

skin trouble.

Step 4 "

REFRESH

(It is recommended that you use this step once every one or two weeks.)

This mode is to condition your skin by fine vibrations and gentle electrode switching.

4. Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button.

●

Every time the "LEVEL" selector button is pressed, the potential power level is

switched between "HIGH" and "LOW"

The vibration power does not change.

Select the potential power level ("HIGH" or "LOW") with the "LEVEL" selector button

according to your skin condition.

●

The previous potential power level ("HIGH" or "LOW") is stored by the memory function.

Use at the "LOW" level is recommended for people who use this device for the first

time and who feel something unusual.

Hitachi CM-N8100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info