Bedienungsanleitung Hitachi D6SH-2 (Seite 5 von 41) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

566268

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English

SPECIFICATIONS

Model D 6SH D 6SB

Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power input 240 W*

No-load speed 4500 min

–1

3000 min

–1

Capacity: steel 6.5 mm 6.5 mm

wood 9 mm 13 mm

Weight (without cord)

Spec. for keyed chuck 0.9 kg

Spec. for keyless chuck 1.0 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Chuck Wrench (Spec. only for keyed chuck) ...... 1

(2) Stopper Ass’y (Spec. only for keyed chuck).......1

(3) Hook ............................................................................ 1

Standard accessories are subject to change without

notice.

APPLICATION

⅜ Drilling holes into various metals, lumbers and

plastics.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the

power switch is in the ON position, the power tool

will start operating immediately, which could cause

a serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Fitting the drill bit

Fit the drill bit into the chuck and use the chuck

wrench to secure it, tightening the chuck by each

of the three holes in turn. (Fig. 3)

For keyless chuck (Fig. 4)

(1) Mounting the bit

After inserting a drill bit, etc. into the keyless drill

chuck, firmly grasp the ring and tighten the sleeve

by turning it toward the right (in the clockwise

direction as viewed from the front).

⅜ If the sleeve becomes loose during operation, tighten

it further. The tightening force becomes stronger

when the sleeve is tightened.

(2) Dismounting the bit

Firmly grasp the ring and loosen the sleeve by

turning it toward the left (in the counter-clockwise

direction as viewed from the front)

5. Selecting the appropriate drill bit

(1) When drilling holes in metals or plastics:

Use ordinary metalworking drill bits;

Applicable drill sizes range from 0.5 mm min. to

6.5 mm max.

(2) When drilling holes in lumber:

Use woodworking drill bits.

For small holes of 6.5 mm dia, or less, use

metalworking drill bits.

PRACTICAL HANDLING PROCEDURES

1. Pressure:

Drilling will NOT be accelerated by placing heavy

pressure on the drill. Such action will only result

in a damaged drill bit, decreased drilling efficiency

and/or shortened service life of the drill.

2. When drilling completely through the material:

When the drill bit bores completely through the

material, careless handling often results in a broken

PRECAUTIONS ON USING DRILL

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. When mounting the drill bit, insert it fully into the

drill chuck and completely tighten the drill chuck

with the chuck wrench.

If mounting is not done porperly, it is very dangerous

as the drill bit may slip or loosen during operation.

4. Do not wear gloves made of stuff liable to roll up

such as cotton, wool, cloth or string, etc.

5. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

6. When placing the drill on the floor, make sure that

the drill has stopped completely.

7. Before drilling into a wall, floor or ceiling, thoroughly

confirm that no items such as electric cables or

conduits are buried inside.

8. When working in high position, take care of

downword direction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi D6SH-2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info