Bedienungsanleitung Hitachi ds 12dvf2 (Seite 32 von 41) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

386263

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English

(2) Regarding the temperatures of the rechargeable

battery.

The temperatures for rechargeable batteries are as

shown in Table 2, and batteries that have become

hot should be cooled for a while before being

recharged.

Table 2 Recharging ranges of batteries

(3) Regarding recharging time

Depending on the combination of the charger and

batteries, the charging time will become as shown

in Table 3.

Table 3 Charging time (At 20°C)

NOTE:

⅜ The charging time may vary according to

temperature and power source voltage.

4. Disconnect the charger’s power cord from the

rceptacle.

5. Hold the charger firmly and pull out the battery.

NOTE:

⅜ After operation, pull out batteries from the charger

first, and then keep the batteries properly.

CAUTION:

⅜ If the battery has been heated right after operation

(or due to sunlight, etc.), the charger’s pilot lamp

may not light in red. In such a case, first let the

battery cool, then start charging.

⅜ When the pilot lamp flickers in red quickly (at 0.2-

second intervals), check for and take out any foreign

objects in the charger’s battery installation hole. If

there are no foreign objects, it is probable that the

battery or charger is malfunctioning. Take them to

your HITACHI Authorized Service Center.

⅜ Since the built-in micro computer takes about 3

seconds to confirm that the battery being charged

with UC14YFA is taken out, wait for a minimum of

3 seconds before reinserting it to continue charging.

If the battery is reinserted within 3 seconds, the

battery may not be properly charged.

Regarding electric discharge in case of new batteries,

etc.

As the internal chemical substance of new batteries

and batteries that have not been used for an

extended period is not activated, the electric

discharge might be low when using them the first

and second time. This is a temporary phenomenon,

and normal time required for recharging will be

restored by recharging batteries 2 – 3 times.

How to make the batteries perform longer

(1) Recharge the batteries before they become

completely exhausted.

When you feel that the power of the tool becomes

weaker, stop using the tool and recharge its battery.

If you continue to use the tool and exhaust the

electric current, the battery may be damaged and

its life will become shorter.

(2) Avoid recharging at high temperatures.

A rechargeable battery will be hot immediately after

use. If such a battery is recharged immediately after

use, its internal chemical substance will deteriorate,

and the battery life will be shortened. Leave the

battery and recharge it after it has cooled for a

while.

PRIOR TO OPERATION

1. Setting up and checking the work environment

Check if the work environment is suitable by

following the precautions.

HOW TO USE

1. Confirm the cap position (see Fig. 4)

The tightening torque of this unit can be adjusted

according to the cap position, at which the cap is

set.

(1) When using this unit as a screwdriver, line up the

one of the numbers “1, 3, 5 ... 22” on the cap, or

the black dots, with the triangle mark on the outer

body.

(2) When using this unit as a drill, align the cap drill

mark “

” with the triangle mark on the outer

body.

CAUTION:

⅜ The cap cannot be set between the numbers “1,

3, 5 ... 22” or the black dots.

⅜ Do not use with the cap set at the black line between

the number “22” and the drill mark “

”. Doing

so may cause damage. (See Fig. 5)

2. Tightening torque adjustment

(1) Tightening torque

Tightening torque should correspond in its intensity

to the screw diameter. When too strong torque is

used, the screw head may be broken or be injured.

Be sure to adjust the cap position according to the

screw diameter.

Temperatures at

Rechargeable batteries which the battery

can be recharged

EB912S, EB9S, EB914, EB914S,

EB9B, EB9M, EB924, EB1212S,

EB12S, EB1214L, EB1214S, EB12B,

EB1220BL, EB12M, EB1224,

EB1412S, EB14S, EB1414, EB1414S,

EB14B, EB1424

EB12H, EB1222HL, EB1230H,

EB1230HL, EB14H, EB1430H

–5˚C – 55˚C

0˚C– 45˚C

Charger

UC14YFA

Battery

EB912S, EB9S, EB1212S, EB12S,

EB1412S, EB14S, EB914, EB1214L, Approx. 30 min.

EB1414, EB914S, EB1214S, EB1414S

EB9B, EB9M, EB12B, EB1220BL

Approx. 50 min.

EB12M, EB14B

EB9H, EB12H, EB1222HL, EB14H Approx. 55 min.

EB924, EB1224, EB1424 Approx. 60 min.

EB930H, EB1230H, EB1230HL

Approx. 70 min.

EB1430H

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi ds 12dvf2 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi ds 12dvf2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info