370702
22
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
22
Selecting the Colour System
You can setup the colour system of this unit to match up your
connected TV set. If the colour system of this unit is different
from that of the TV set, the images can not be displayed nor-
mally on the screen. The default setting is MULTI.
1 Press SETUP button to enter SETUP MENU. Use / to
select GENERAL SETUP (see page 20), and then press
ENTER button.
2 Highlight TV TYPE using / , then press button to go to
the right option list. Select MULTI, NTSC or PAL using / ,
then press ENTER to confirm your selection.
3 Press SETUP again to exit menu.
Note:
You can change the colour system of the unit temporarily
using NTSC/PAL button on the remote control.
MULTI
NTSC
PAL
Selecting the Audio Output
Mode
You must setup the audio output mode correctly, if not, you will
not get the audio outputs. The default setting is ANALOG.
ANALOG: If the SPEAKERS outputs on the rear panel are
connected with speakers directly, or the AUDIO OUT (2 RCA
jacks) is connected to amplifier, select this item.
SPDIF/RAW: If the COAXIAL or OPTICAL output on the rear
panel is connected to a receiver with built-in Dolby Digital,
DTS or/and MPEG decoder, select this item.
SPDIF/PCM: If the COAXIAL or OPTICAL output is connected
with a receiver which accepts PCM audio signal, select this
item.
1 Press SETUP button to enter SETUP MENU. Use / to
select GENERAL SETUP (see page 13), and then press
ENTER button.
2 Highlight AUDIO OUT using / , then press button to go
to the right option list. Select ANALOG, SPDIF/RAW or
SPDIF/PCM using / , then press ENTER to confirm your
selection.
3 Press SETUP again to exit menu.
Note:
If the SPDIF/RAW is selected and the audio source is LPCM
(DVD), the outputs in the COAXIAL and OPTICAL are PCM.
If the SPDIF/RAW is selected and the audio source is audio
CD, the outputs in the COAXIAL and OPTICAL are PCM.
If the ANALOG is selected, the COAXIAL and OPTICAL will
not have audio outputs.
If your speaker system does not match your AUDIO OUT
setting, you will not be able to enjoy the true original sound.
ANALOG
SPDIF/RAW
SPDIF/PCM
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi htd k 150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info