370702
23
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
23
Selecting the Video Output
Mode
You must setup the audio output mode correctly, if not, you will
not get the video outputs. The default setting is CVBS.
CVBS: Composite video output and S-video output avail-
able. If the connected video output terminal is VIDEO OUT-
PUT or S-VIDEO OUTPUT on the rear panel, select this
item.
RGB: Color separate signal (Red, Green and Blue) outputs
are available. If the connected video output terminals are
SCART or R, G, B on the rear panel, select this item.
YUV: Video Chroma and Lum separate signal outputs are
available. If the connected video output terminals are Y, U, V
on the rear panel, select this item.
1 Press SETUP button to enter SETUP MENU. Use / to
select GENERAL SETUP (see page 22), and then press
ENTER button.
2 Highlight VIDEO OUTPUT using / , then press button
to go to the right option list. Select CVBS, RGB or YUV
using / , then press ENTER to confirm your selection.
3 Press SETUP again to exit menu.
Note:
Maybe there are not the terminals on your unit for Scart,
RGB and YUV outputs. These video output terminals are
used for options by manufacturer.
CVBS
RGB
YUV
Speakers Setup
Position
For the best possible surround sound all the speakers other
than the subwoofer should be the same distance from the
listening position.
However, this system allows you to place the center speaker
up to 1.6 meters closer (
B
) and the rear speakers up to 4.6
meters closer (
C
) to the listening position.
The front speakers can be placed from 1.0 to 15.0 meters
( A ) from the listening position.
You can place the subwoofer at any position. If possible,
place the subwoofer near a corner to maximize the bass
response.
You can place the rear speakers either behind you or to the
side, depending on the shape of your room, etc.
When the rear speakers are placed to the side:
When the rear speakers are placed behind you:
45
o
20
o
90
o
A A
B
C
C
45
o
20
o
90
o
AA
B
C C
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi htd k 150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info