Bedienungsanleitung Hitachi RH600T (Seite 8 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

570706

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

3. Heat wrapping (Fig. 7)

Use nozzle (ﬂ at) to heat-wrap shrink ﬁ lm and tubes. The

material will change color or crack if hot air is blown onto

it from a close distance, so maintain an appropriate

distance while monitoring progress.

4. Forming resin pipes (Fig. 8)

Use nozzle (curved surface) to evenly heat the

circumference of the resin pipe.

To prevent the inside of the pipe from narrowing when

bending it, etc., pour sand inside, block both ends and

then gently bend it.

5. Removing putty from window frames (Fig. 9)

Use nozzle (glass protector) to soften the putty with heat,

and then remove the putty with the scraper supplied.

Note that glass may crack if heat is continually applied

to it.

6. Defrosting water pipes (Fig. 10)

Use nozzle (curved surface) to heat the frozen area from

the edge to the center. Do not mistake water pipes for

glass pipes.

Take care to avoid damaging frozen resin areas on

water pipes.

[Eﬀ ectively Using the Quick Cooling Button]

Press the quick cooling button and press the switch to

blow warm air at approximately 50 degrees Celsius for

each of the switch’s wind volumes.

This is used to quickly cool material that is heat-

warping and to cool the nozzle when it reaches high

temperatures after using the Heat Gun.

MAINTENANCE AND INSPECTION

1. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

2. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool.

Prevent any foreign objects, oil or water from getting

inside the intake.

3. Replacing supply cord

If the replacement of the supply cord is necessary, this

has to be done by Hitachi Authorized Service Center in

order to avoid a safety hazard.

4. Cleaning of the outside

When the tool is stained, wipe with a soft dry cloth or a

cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, as they melt plastics.

5. Service parts list

CAUTION

Repair, modiﬁ cation and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

This Parts List will be helpful if presented with the tool to

the Hitachi Authorized Service Center when requesting

repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved

and modiﬁ ed to incorporate the latest technological

advancements.

Accordingly, some parts may be changed without prior

notice.

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country speciﬁ c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a Hitachi Authorized Service Center.

NOTE

Due to HITACHI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

IMPORTANT:

Correct connection of the plug

The wires of the main lead and coloured in accordance

with the following code:

Blue: -Neutral

Brown: -Live

As the colours of the wires in the main lead of this tool may

not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

The wire coloured blue must be connected to the terminal

marked with the letter N or coloured black.

The wire coloured brown must be connected to the terminal

marked with the letter L or coloured red.

Neither core must be connected to the earth terminal.

NOTE:

This requirement is provided according to BRITISH

STANDARD 2769: 1984.

Therefore, the letter code and colour code may not be

applicable to other markets except The United Kingdom.

000Book_RH600T_WE.indb 8000Book_RH600T_WE.indb 8 2013/10/04 13:41:552013/10/04 13:41:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi RH600T Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info