Bedienungsanleitung Hitachi sv 8 sa (Seite 18 von 21) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

389694

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

English

SPECIFICATIONS

Model SV8SA SV12SF

Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)

Power Input* 200 W

No-Load Speed 14000/min.

Sanding pad size 80 mm x 130 mm 110 mm x 100 mm

Sanding paper size 80 mm x 170 mm 114 mm x 140 mm

Weight (without cord) 1.1 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

⅜ Sanding paper (Grain: AA100) .............................. 1

⅜ Dust bag .................................................................... 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

1. Sanding paper

ϽFor SV8SA useϾ

⅜ 80 x 170 mm paper clip type sanding paper

Grain: AA60, AA100, AA150

⅜ 80 x 130 mm Velcro type sanding paper

Grain: AA60, AA100, AA150

ϽFor SV12SF useϾ

⅜ 114 x 140 mm paper clip type sanding paper

Grain: AA60, AA100, AA150

⅜ 110 x 100 mm Velcro type sanding paper

Grain: AA60, AA100, AA150

⅜ 110 x 100 mm stick-on type sanding paper

Grain: AA60, AA80, AA100, AA120, AA150, AA180

⅜ Outer diameter 125 mm stick-on type sanding paper

Grain: AA60

2. Sanding pad

ϽFor SV8SA useϾ

⅜ 80 x 130 mm sponge pad (Velcro type)

ϽFor SV12SF useϾ

⅜ 110 x 100 mm sponge pad (Velcro type)

⅜ 110 x 100 mm stick-on pad

⅜ Outer diameter 125 mm stick-on pad

3. Dust collector (Model WDE-1200)

4. Punch plate

Optional accessories are subject to change without notice.

APPLICATIONS

⅜ Finish polishing of woodwork surfaces

⅜ Sanding surfaces of woodwork or sheet metal prior

to painting, etc.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized con-

forms to the power requirements specified on the

product nameplate.

2. Power switch

Ensure that the power switch is in the OFF position.

If the plug is connected to a power receptacle while

the power switch is in the ON position, the power

tool will start operating immediately, which could

cause a serious accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Installing the sanding paper

(1) Bending the sanding paper:

Position the sander with its pad side facing upward

as shown in Fig. 1. Place the sanding paper on the

pad so that the center of the sanding paper is

aligned with the center of the pad, and bend both

ends of the sanding paper at a 90° angle. Then,

bend both ends again in the manner shown in Fig.

2. The sanding paper is now ready to be installed

on the sander.

(2) Installing the sanding paper:

While ensuring that the cord is not bent, place the

sander on a workbench as shown in Fig. 3, and

insert one end of the sanding paper (bent section).

Next, insert the remaining bent section in the same

manner.

CAUTION

The sanding paper must be precisely installed on

the pad, ensuring that there is ample tension (leav-

ing no slack). Loosely installed sanding paper could

result in unevenly sanded surfaces and/or damage

to the sanding paper itself.

5. Attaching and Removing the Dust Bag

(1) Attaching the Dust Bag

As shown in Fig. 4, hold the dust gate and push

it in the direction of Arrow A to attach it to the

dust outlet.

(2) Removing the Dust Bag

As shown in Fig 4, hold the dust gate and pull it

in the direction of Arrow B to remove it from the

dust outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi sv 8 sa Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hitachi sv 8 sa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info