661495
7
Zoom out
Zoom in
Vorherige Seite
1/288
Nächste Seite
English
7
(Original instructions)
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Grass Trimmer / Brush Cutter Priming pump
It is important that you read, fully understand
and observe the following safety precautions
and warnings. Careless or improper use of the
unit may cause serious or fatal injury.
Guaranteed sound power level
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Blade thrust may occur when the spinning
blade contacts a solid object in the critical area.
A dangerous reaction may occur causing the
entire unit and operator to be thrust violently.
This reaction is called blade thrust. As a result,
the operator may lose control of the unit which
may cause serious or fatal injury. Blade thrust is
more likely to occur in areas where it is di cult
to see the material to be cut.
Always wear eye, head and ear protectors when
using this unit.
Do not use metal/rigid blades when this sign is
shown on the unit.
Hot Surface – Contact with hot surface can
cause serious burns.
Keep all children, bystandards and helpers
15 m away from the unit. If anyone approaches
you, stop the engine and cutting attachment
immediately.
The hedge trimmer attachment cannot be used
on models with this label.
Be careful of thrown objects.
Indicate handle location. Arrows which show
limits for handle positioning.
min
-1
Shows maximum shaft speed. Do not use the
cutting attachment whose max rpm is below the
shaft rpm.
Displacement
Gloves should be worn when necessary, e.g.,
when assembling cutting equipment.
Spark plug
Use anti-slip and sturdy footwear.
Idle
Idling speed
Choke – Run position (Open) Speed of output shaft
Choke – Start position (Closed)
Max. engine output
On/Start Fuel tank capacity
O /Stop
Dry weight (without fuel, cutting attachment,
harness and cutting attachment guard)
Emergency stop Cutting attachment
Fuel and oil mixture
L
pA, eq

Sound pressure level LpA by ISO 22868
Equivalent*
Idle speed adjustment
L
WA, Ra(M)

Measured sound power level LwA by 2000/14/
EC
Racing
000Book_TCG24ECP(S).indb 7000Book_TCG24ECP(S).indb 7 2017/03/24 10:10:472017/03/24 10:10:47
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hitachi TCG24ECP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info