Bedienungsanleitung Hitachi UG50Y (Seite 16 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

571421

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

English

Display Content

Before measuring ----- m

----- m

After measuring

side A

1.862 m

→Side A measurement

After measuring

side B

5.039 m

5.372 m

→ Calculated result of

side C

→Side B measurement

Deleting a measurement (Fig. 2)

Press the power on/oﬀ (clear) button on the operation panel to delete

a measurement.

Turning on the display light (Fig. 2)

Press the display light button to turn the green backlight on and oﬀ .

The backlight goes oﬀ automatically after approximately 8 seconds if

no button is pressed.

The backlight cannot be turned on and oﬀ while measuring.

Muting the beep (Fig. 2)

Press and hold the memory button on the operation panel for at least 2

seconds to turn the beep on and oﬀ .

Changing the unit (Fig. 2)

Press the unit select button on the operation panel to change the

measurement unit.

Turning oﬀ the power (Fig. 2)

Press and hold the power on/oﬀ (clear) button on the operation panel

for at least 2 seconds to turn the power oﬀ .

6. Saving, adding, subtracting

and deleting a measurement

Saving (Fig. 2, 3)

Press the memory button to save the measurement indicated on

the display. [=] appears in the top row of the display and the saved

measurement is indicated next to it.

The saved measurement is not deleted when the power is turned oﬀ

and it is indicated in the top row of the display the next time the power

is turned on.

Adding (Fig. 2, 3)

A new measurement can be added to a previous measurement already

stored in the memory.

Press the add button when a measurement is displayed. The calculated

result and [+] next to it blink 3 times in the top row on the display.

Measurements in diﬀ erent units (m, m

, m

) cannot be added.

Subtracting (Fig. 2, 3)

A new measurement can be subtracted from a measurement already

stored in the memory.

Press the subtract button when a measurement is displayed. The

calculated result and [–] next to it blink 3 times in the top row on the

display.

Measurements in diﬀ erent units (m, m

, m

) cannot be subtracted.

NOTE

○

You can continue adding or subtracting when a measurement is

indicated on the display.

○

Pressing the memory button when a measurement is already saved

in the memory and the latest measurement is shown on the display

deletes the existing measurement.

Deleting a saved measurement (Fig. 2, 3)

Press the memory button to move the measurement indicated on

the display to the top row.

Press the power on/oﬀ (clear) button to delete the memory.

CHECKING THE ACCURACY (before and after

use)

If the accuracy is found to be faulty, contact the dealer for repairs.

WARNING

Be sure to check the following before and after use.

Using the instrument in a faulty condition may lead to errors.

Checking repeated measuring accuracy

Fix the position of the instrument and measure a distance of

approximately 1 m to 5 m ten times.

000Book_UG50Y_WE.indb 15000Book_UG50Y_WE.indb 15 2009/08/20 13:48:092009/08/20 13:48:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hitachi UG50Y Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info