Bedienungsanleitung Honda FG110 (Seite 5 von 18) (Englisch)

625322

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH

Safety Inspection

• Look around the engine for signs of oil or petrol leaks. Wipe up any

spills before starting the engine.

• Replace any damaged parts.

• Check that all fasteners are in place and secure. Tighten as

necessary.

Tiller Tine Inspection

• Look for signs of damage to the tilling tines (or any accessory

installed). Replace any tiller tines and parts that are worn out, bent,

cracked, chipped, or damaged in any way.

• When using an accessory, make sure it is properly installed and

securely fastened (see attachment installation instructions).

• Check that the debris shield is securely installed and in good

condition.

Maintenance Inspection

• Check the oil level (page 8). Running the engine with a low oil level

can cause engine damage.

• Check the air filter (page 9). A dirty air filter will restrict air flow to

the carburetor, reducing engine and tiller performance.

• Check throttle operation (page 11). The throttle must operate

smoothly for good throttle control.

• Check the fuel level (page 11). Starting with a full tank will

help to eliminate or reduce operating interruptions for

refueling

OPERATION

SAFE OPERATING PRECAUTIONS

Before operating the tiller for the first time, please review

IMPORTANT SAFETY INFORMATION (page 2) and BEFORE

OPERATION (page 4).

Even if you have operated other tillers, take time to become familiar

with the operation of this tiller’s controls and handling.

For your safety, avoid starting or operating the engine in an enclosed

area, such as a garage. Your engine’s exhaust contains poisonous

carbon monoxide gas which can collect rapidly in an enclosed area

and cause illness or death.

If the tiller starts to shake or vibrate, stop the engine immediately.

After the tiller tines have completely stopped, inspect them to

determine the cause of the vibration. Sudden vibration is a sign of a

hazardous problem, such as a loose or damaged tilling tines (or tiller

attachment), hidden objects in the soil, or the ground that is too hard

to till. Do not operate the tiller until the problem is corrected.

Prolonged exposure to vibration may cause hand/arm vibration

syndrome (HAVS). Symptoms include loss of skin color in the hands

and numbness or a painful tingling sensation in the fingers, hands,

and arms. Regular users of any power equipment may feel the

numbness or pain spontaneously, at any time, not just after using the

equipment. If any of these symptoms occur, see a physician

immediately.

Tine Installation

Make sure the tines are installed properly with the blades angled

inward and the tine spacers [1] facing each other. The leading edge of

each blade is slanted.

Viewed from the front.

Drag Bar Installation

1. Make sure the engine is OFF before installing the drag bar.

2. Remove the lock pin [1] and the 6 x 25 mm clevis pin [2].

3. Install the drag bar [3] angled to the rear. Adjust the height to one

of 4 height positions and insert the 6 x 25 mm clevis pin. Secure

with the lock pin.

When your tilling job is completed, reinstall the transport wheels onto

the drag bar.

[1]

FORWARD

[3]

[2]

[1]

FG110 EU.book Page 5 Thursday, January 22, 2009 8:14 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda FG110 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda FG110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info