Bedienungsanleitung Honda HRS536 (Seite 7 von 56) (Englisch, Französisch, Spanisch)

477990

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH 7

Cutting Height

Check the mower deck

cutting height settings, and

be sure that all four

adjustment levers [1] are

set to the same cutting

height position.

To adjust cutting height,

pull each adjustment lever

[1] toward the wheel, and

move it into another notch.

If you are not sure what

cutting height to select,

start with a high setting

and check the appearance

of the lawn after mowing a

small area. Then readjust

the cutting height if

necessary.

OPERATION

SAFE OPERATING PRECAUTIONS

Before operating the mower for the first time, please review SAFETY

INSTRUCTIONS (page 2) and PRE-OPERATION CHECKS (page 5).

Even if you have operated other mowers, take the time to become

familiar with how this mower works, and practice in a safe area until

you build up your skills.

For your safety, avoid starting or operating the engine in an enclosed

area such as a garage. Your mower's exhaust contains poisonous

carbon monoxide gas that can collect rapidly in an enclosed area and

cause illness or death.

STARTING THE ENGINE

The blade turns when you operate the starter. It is easiest to start the

engine in a clear or mowed area where the blade can turn freely.

1. Turn the fuel valve [1] to the ON [2] position.

2. Move the throttle lever [1] to

the proper starting position.

COLD ENGINE:

Move the throttle lever [1] to

the CHOKE position [2].

WARM ENGINE:

Move the throttle lever [1] to

the FAST position [3].

3. Release the drive clutch lever.

If the drive clutch lever is

engaged, the mower will

move forward when you

operate the starter.

4. Pull back on the flywheel

brake lever [4] and hold it

against the handlebar.

5. Pull the starter grip [5] lightly

until you feel resistance, then

pull briskly. Return the starter

grip gently.

Keep your hands and feet

away from the mower deck at

all times when starting and

running the engine.

Continue to hold the flywheel

brake lever against the

handlebar; the engine will

stop if you release the lever.

6. Move the throttle lever away

from the CHOKE position [2]

as soon as the engine warms

up enough to run smoothly.

Put the throttle lever in the

FAST position [3] to mow or to

the SLOW position [6] to idle.

Flooded Engine

If the engine still refuses to start after several pulls on the starter, the

engine may be flooded.

To clear a flooded engine:

1. Remove and dry the spark plug. When installing the spark plug,

screw it in finger tight and correctly seated. Using the correct size

plug wrench, tighten it an additional 1/8 to 1/4 turn so that the

washer is correctly compressed.

2. Put the throttle lever in the FAST position and repeat step 3 ~ 5

under STARTING THE ENGINE.

[1]

[2]

[1]

[2]

[3]

[6]

[3]

[2]

[4]

[5]

[3]

[6]

00X39VG36410.book Page 7 Monday, November 16, 2009 1:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda HRS536 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Honda HRS536

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info