Finial
Finial Cap
Threaded Rod
Hex Nut
Hex Nut
Bulb
Rubber Washer
Switch Housing
Rubber
Washer
Fig. 27
Fig. 28
Fig. 26
LIGHT KIT INSTALLATION
27. Feed the fan pull chain from the switch housing
through the off-center hole in the glass bowl. Then,
feed the pull chain from the light kit through the
center hole in the glass bowl, rubber washer and
hex nut (Fig. 27).
28. Lift the glass bowl and rubber washer over the
threaded rod. Screw the hex nut onto the threaded
rod to secure the glass bowl. Feed the pull chains
through the appropriate holes in the nial cap. Lift
the nial cap up until it is ush with the glass bowl
and secure with the nial (Fig. 28).
Proceed to step 31.
26. Install the candelabra-base A15 bulbs (Fig. 26).
1515
