Bedienungsanleitung Honeywell HZ-420 Series (Seite 7 von 29) (Englisch, Französisch, Spanisch)

527101

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

TROUBLESHOOTING

If your 360º Ceramic Surround Heater shuts off unexpectedly or fails to operate, one of your heater safety

features may have been activated to prevent overheating.

• Be sure it is plugged in and that the electrical outlet is working.

• Check for any obstructions. If you find an obstruction, turn the heater OFF (

) or ( ) and unplug it.

• Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug

the heater in and follow the OPERATION instructions

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult an experienced radio/TV technician for help

Modifications not approved by the party responsible for compliance could void user’s authority to operate the

equipment pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interfere

PRODUCT SPECIFICATIONS

Model(s) HZ-420 Series, HZ-430 Series, HZ-440 Series

Unit dims HZ-420 Series, HZ-440 Series 8.75” x 8.75” x 17.25” (22.2cm x 22.2cm x 43.8cm)

HZ-430 Series 8.75” x 8.75” x 18.5” (22.2cm x 22.2cm x 47cm)

Amps 12.5

Unit Voltage 120V, 60Hz

Max Watts 1500

Max BTUs 5118

Operation Cost*

To estimate the cost to operate this heater, multiple the watts used times .001 to convert into a kilowatts

measure and multiple by your local kilowatt electric rate for however long you run the heater. For

example, if your electric rate is $.1196** per kilowatt hour and you ran this heater in constant high mode

(1500 watts) for 4 hours, it would cost you $.71 cents to run the heater (1500 watts x 4 hours x.001) x

.1196kwp = .71 cents)

NOTE: Because the Low (

) or EnergySmart™ (HZ-430 Series) Settings do not require as much

electricity to operate, they are more energy efficient and may be better options if you are concerned about

the amperage draw on a circuit when the heater is on the High (

) setting.

*Calculation (Total Wattage x .001) x Cost per Kilowatt Hour = Cost to operate

**Average Retail Price of Electricity to Ultimate Customer by End-Use, US Energy Information Administration,

August 11, 2010

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honeywell HZ-420 Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info